Andromeda PE5

Andromeda PE5 is a carrier board from Enclustra.

• MPN: AM-PE5-W
• Type: carrier board
• Vendor: Enclustra
• Status: active
• Product page: https://www.enclustra.com/en/products/base-boards/andromeda-pe5/
• Catalog page: https://boards.fpgadeveloper.com/carriers/AM-PE5-W
• Structured data (JSON): https://boards.fpgadeveloper.com/data/carriers.json

Specifications

• Clocking:
• Programmable: Yes
• PCIe:
• Type: Edge; Lanes: 8
• M.2:
• Key: M-key; Direction: socket
• Interfaces:
• PCIe
• SATA
• Networking:
• Sfp28: 2
• Qsfp28: 1
• Ethernet:
• Speed: 1000; Ports: 2; Endpoint: rj45
• Video:
• HDMI In: 1
• HDMI Out: 1
• Displayport: 1
• Sdi In: 2
• Sdi Out: 2
• USB:
• Connector: Type-C; Speed: 3.0; Role: host; Ports: 2
• USB Bridge:
• Connector: Micro-B
• Functions:
• jtag
• uart
• Expansion:
• FMC:
• Slot: FMC0; Type: fmcp; Vadj Min: 1.2; Vadj Max: 3.3
• Slot: FMC1; Type: fmcp; Vadj Min: 1.2; Vadj Max: 3.3
• Storage:
• Microsd: 1
• Features:
• Power Monitoring: Yes

Compatibility

Used in kits

• Andromeda XRU50 Design-in Kit (QSK-DK-AM-XRU50-48DR-PB5)

Notes

Each FMC+ slot has an independent VADJ rail (V_ADJ_F0 / V_ADJ_F1) selected by DIP switches VSEL0 / VSEL1 (switches 1-3): OFF, 1.2 V, 1.5 V, 1.72 V, 1.8 V, 2.5 V or 3.3 V; factory default 1.8 V. The board's OVP circuit disables a rail set above the module's advertised maximum, but the FMC IPMI EEPROM is not read - the user must set the switches to match the FMC card.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*