The ADRV1CRR-FMC is the FMC carrier for Analog Devices' SDR System-on-Module family. Compatible SoMs: ADRV9361-Z7035 (full functionality) and ADRV9364-Z7020 (subset \u2014 HDMI Out, Camera, PMOD0, SFP+, LEDs 1-3, slide switches, push-button 0 and the FMC connector are not supported on the Z7020 due to its smaller pin count). The ADRV9009-ZU11EG uses a different carrier (ADRV2CRR-FMC).
\nThe four GTX serial transceivers from the mated SoM are allocated as:
\n| Lane | \nDestination | \n
|---|---|
| 1 | \nPCIe Gen2 x1 card-edge connector | \n
| 2 | \nFMC LPC connector | \n
| 3 | \nSFP+ cage | \n
| 4 | \nGeneral-purpose SMA break-out | \n
The carrier has no FPGA of its own; all programmable logic is provided by the mated SoM. The Pmod tally (3) covers PMOD0, PMOD1 and PMOD_MIO from the wiki user guide \u2014 PMOD_MIO is wired to Zynq PS MIO pins rather than the PL.
\nFMC VADJ supports 1.8 V / 2.5 V / 3.3 V (discrete values; default 1.8 V), selected before power-on by 3-pin header P8 in the ADP5052 regulator's feedback network: open = 1.8 V (default), short 1-2 = 2.5 V, short 2-3 = 3.3 V. The FMC card's IPMI EEPROM is not consulted. The same VADJ rail also feeds the mated SoM's PL bank that drives the FMC LA signals.
", "_notes_md": "The ADRV1CRR-FMC is the **FMC carrier** for Analog Devices' SDR System-on-Module family. Compatible SoMs: **ADRV9361-Z7035** (full functionality) and **ADRV9364-Z7020** (subset \u2014 HDMI Out, Camera, PMOD0, SFP+, LEDs 1-3, slide switches, push-button 0 and the FMC connector are not supported on the Z7020 due to its smaller pin count). The ADRV9009-ZU11EG uses a different carrier (ADRV2CRR-FMC).\n\nThe four GTX serial transceivers from the mated SoM are allocated as:\n\n| Lane | Destination |\n|---|---|\n| 1 | PCIe Gen2 x1 card-edge connector |\n| 2 | FMC LPC connector |\n| 3 | SFP+ cage |\n| 4 | General-purpose SMA break-out |\n\nThe carrier has no FPGA of its own; all programmable logic is provided by the mated SoM. The Pmod tally (3) covers PMOD0, PMOD1 and PMOD_MIO from the wiki user guide \u2014 PMOD_MIO is wired to Zynq PS MIO pins rather than the PL.\n\nFMC VADJ supports 1.8 V / 2.5 V / 3.3 V (discrete values; default 1.8 V), selected before power-on by 3-pin header P8 in the ADP5052 regulator's feedback network: open = 1.8 V (default), short 1-2 = 2.5 V, short 2-3 = 3.3 V. The FMC card's IPMI EEPROM is not consulted. The same VADJ rail also feeds the mated SoM's PL bank that drives the FMC LA signals.", "_class": "carrier", "_compatible_fmc_cards": [ { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "FMC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-2V5", "vendor": "opsero", "name": "Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "FMC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "FMC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "FMC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-2V5", "vendor": "opsero", "name": "Robust Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "FMC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "FMC", "verdict": "partial", "summary": "1 of 2: Port 0 (x1 of x4)", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "FMC", "verdict": "partial", "summary": "1 of 4: Port 0", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "FMC", "verdict": "partial", "summary": "1 of 6: SpaceFibre Port 1", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "FMC", "verdict": "partial", "summary": "1 of 2: SSD Slot 1 (x1 of x4)", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "FMC", "verdict": "partial", "summary": "1 of 2: M.2 Slot 1 (x1 of x4)", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "FMC", "verdict": "partial", "summary": "1 of 4: Port 0", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "AES-ZUEV-CC-G", "name": "UltraZed-EV Carrier Card", "status": "active", "url": "https://www.tria-technologies.com/product/ultrazed-ev-carrier-card/", "vendor": "tria", "price": { "value": 989.0, "currency": "USD" }, "eeprom": [ { "purpose": [ "mac_address" ] } ], "pcie": [ { "type": "Slot", "gen": 2, "lanes": 1 } ], "video": { "hdmi_in": 1, "hdmi_out": 1, "displayport": 1, "sdi_in": 1, "sdi_out": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "pmod": 3, "fmc": [ { "slot": "HPC", "type": "hpc" } ] }, "storage": { "microsd": 1, "sata": 1 }, "_class": "carrier", "_compatible_soms": [ { "mpn": "AES-ZU7EV-1-SOM-I-G", "vendor": "tria", "name": "UltraZed-EV SOM", "verified_by": "vendor", "notes": "" } ], "_used_in_kits": [ { "mpn": "UltraZed-EV-Starter-Kit", "vendor": "tria", "name": "UltraZed-EV Starter Kit", "price": { "value": 1595, "currency": "USD" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "verified", "verified_by": "vendor", "vadj_ok": null, "notes": "2x 40G." }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "verified", "verified_by": "vendor", "vadj_ok": null, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "verified", "verified_by": "vendor", "vadj_ok": null, "notes": "4 ports." }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "verified", "verified_by": "vendor", "vadj_ok": null, "notes": "Gen3 PCIe, dual SSD." }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "verified", "verified_by": "vendor", "vadj_ok": null, "notes": "Gen3 PCIe, both slots." }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "verified", "verified_by": "vendor", "vadj_ok": null, "notes": "Both channels x4." }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "verified", "verified_by": "vendor", "vadj_ok": null, "notes": "4 ports." }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "verified", "verified_by": "vendor", "vadj_ok": null, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "verified", "verified_by": "vendor", "vadj_ok": null, "notes": "" }, { "mpn": "OP031-2V5", "vendor": "opsero", "name": "Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-2V5", "vendor": "opsero", "name": "Robust Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" } ] }, { "mpn": "AM-PE5-W", "name": "Andromeda PE5", "status": "active", "url": "https://www.enclustra.com/en/products/base-boards/andromeda-pe5/", "vendor": "enclustra", "price": null, "clocking": { "programmable": true }, "pcie": [ { "type": "Edge", "lanes": 8 } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe", "SATA" ] } ], "networking": { "sfp28": 2, "qsfp28": 1, "ethernet": [ { "speed": 1000, "ports": 2, "endpoint": "rj45" } ] }, "video": { "hdmi_in": 1, "hdmi_out": 1, "displayport": 1, "sdi_in": 2, "sdi_out": 2 }, "usb": [ { "connector": "Type-C", "speed": "3.0", "role": "host", "ports": 2 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "expansion": { "fmc": [ { "slot": "FMC0", "type": "fmcp", "vadj_min": 1.2, "vadj_max": 3.3 }, { "slot": "FMC1", "type": "fmcp", "vadj_min": 1.2, "vadj_max": 3.3 } ] }, "storage": { "microsd": 1 }, "features": { "power_monitoring": true }, "_notes_html": "Each FMC+ slot has an independent VADJ rail (V_ADJ_F0 / V_ADJ_F1) selected by DIP switches VSEL0 / VSEL1 (switches 1-3): OFF, 1.2 V, 1.5 V, 1.72 V, 1.8 V, 2.5 V or 3.3 V; factory default 1.8 V. The board's OVP circuit disables a rail set above the module's advertised maximum, but the FMC IPMI EEPROM is not read - the user must set the switches to match the FMC card.
", "_notes_md": "Each FMC+ slot has an independent VADJ rail (V_ADJ_F0 / V_ADJ_F1) selected by DIP switches VSEL0 / VSEL1 (switches 1-3): OFF, 1.2 V, 1.5 V, 1.72 V, 1.8 V, 2.5 V or 3.3 V; factory default 1.8 V. The board's OVP circuit disables a rail set above the module's advertised maximum, but the FMC IPMI EEPROM is not read - the user must set the switches to match the FMC card.", "_class": "carrier", "_used_in_kits": [ { "mpn": "QSK-DK-AM-XRU50-48DR-PB5", "vendor": "enclustra", "name": "Andromeda XRU50 Design-in Kit", "price": { "value": 24399, "currency": "USD" } } ] }, { "mpn": "AV7K300-Carrier", "name": "AV7K300 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Kintex-7/AV7K300.html", "vendor": "alinx", "price": null, "pcie": [ { "type": "Edge", "gen": 2, "lanes": 8 } ], "video": { "sdi_in": 2, "sdi_out": 2 }, "networking": { "sfp_plus": 4 }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AV7K300", "vendor": "alinx", "name": "AV7K300", "price": { "value": 752.99, "currency": "GBP" } } ] }, { "mpn": "AV7K325-Carrier", "name": "AV7K325 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Kintex-7/AV7K325.html", "vendor": "alinx", "price": null, "pcie": [ { "type": "Edge", "gen": 2, "lanes": 8 } ], "video": { "hdmi_in": 2, "hdmi_out": 2 }, "networking": { "sfp_plus": 4 }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 1 }, "storage": { "sata": 2, "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AV7K325", "vendor": "alinx", "name": "AV7K325", "price": { "value": 779.99, "currency": "GBP" } } ] }, { "mpn": "AX7015-Carrier", "name": "AX7015 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-development-Boards/Zynq-7000-SoC/AX7015B.html", "vendor": "alinx", "price": null, "pcie": [ { "type": "Edge", "gen": 2, "lanes": 2 } ], "video": { "hdmi_in": 1, "hdmi_out": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 4 } ], "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 1 }, "storage": { "microsd": 1 }, "user_io": { "leds": 5, "pushbuttons": 2 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7015", "vendor": "alinx", "name": "AX7015", "price": { "value": 383.99, "currency": "GBP" } } ] }, { "mpn": "AX7020-Carrier", "name": "AX7020 Base Board", "status": "active", "url": "https://www.en.alinx.com/detail/273", "vendor": "alinx", "price": null, "video": { "hdmi_out": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host" }, { "connector": "Mini-B", "speed": "2.0", "role": "otg" } ], "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "pmod": 1, "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 6, "pushbuttons": 6 }, "features": { "battery_backed_rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7020", "vendor": "alinx", "name": "AX7020", "price": { "value": 202.99, "currency": "GBP" } } ] }, { "mpn": "AX7021-Carrier", "name": "AX7021 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-development-Boards/Zynq-7000-SoC/AX7021.html", "vendor": "alinx", "price": null, "video": { "hdmi_out": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 5 } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 4 } ], "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7021", "vendor": "alinx", "name": "AX7021", "price": { "value": 383.99, "currency": "GBP" } } ] }, { "mpn": "AX7101-Carrier", "name": "AX7101 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Artix-7/AX7101.html", "vendor": "alinx", "price": null, "video": { "vga_out": 1 }, "networking": { "sfp_plus": 4, "ethernet": [ { "speed": 1000, "ports": 4 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7101", "vendor": "alinx", "name": "AX7101", "price": { "value": 342.99, "currency": "GBP" } } ] }, { "mpn": "AX7102-Carrier", "name": "AX7102 Base Board", "status": "active", "url": "https://www.en.alinx.com/detail/493", "vendor": "alinx", "price": null, "video": { "vga_out": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "serial": { "rs232": 1 }, "usb": [ { "connector": "Mini-B", "speed": "2.0", "role": "host" } ], "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 4 }, "features": { "battery_backed_rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7102", "vendor": "alinx", "name": "AX7102", "price": { "value": 342.99, "currency": "GBP" } } ] }, { "mpn": "AX7103-Carrier", "name": "AX7103 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Artix-7/AX7103.html", "vendor": "alinx", "price": null, "pcie": [ { "type": "Edge", "gen": 2, "lanes": 4 } ], "video": { "hdmi_in": 1, "hdmi_out": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 2 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7103", "vendor": "alinx", "name": "AX7103", "price": { "value": 342.99, "currency": "GBP" } } ] }, { "mpn": "AX7201-Carrier", "name": "AX7201 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Artix-7/AX7201.html", "vendor": "alinx", "price": null, "video": { "vga_out": 1 }, "networking": { "sfp_plus": 4, "ethernet": [ { "speed": 1000, "ports": 4 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7201", "vendor": "alinx", "name": "AX7201", "price": { "value": 410.99, "currency": "GBP" } } ] }, { "mpn": "AX7202-Carrier", "name": "AX7202 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Artix-7/AX7202.html", "vendor": "alinx", "price": null, "video": { "vga_out": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "serial": { "rs232": 1 }, "usb": [ { "connector": "Mini-B", "speed": "2.0", "role": "host" } ], "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 4 }, "features": { "battery_backed_rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7202", "vendor": "alinx", "name": "AX7202", "price": { "value": 410.99, "currency": "GBP" } } ] }, { "mpn": "AX7203-Carrier", "name": "AX7203 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Artix-7/AX7203.html", "vendor": "alinx", "price": null, "pcie": [ { "type": "Edge", "gen": 2, "lanes": 4 } ], "video": { "hdmi_in": 1, "hdmi_out": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 2 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7203", "vendor": "alinx", "name": "AX7203", "price": { "value": 410.99, "currency": "GBP" } } ] }, { "mpn": "AX7A035-Carrier", "name": "AX7A035 Base Board", "status": "active", "url": "https://www.en.alinx.com/detail/496", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 2, "lanes": 4 } ], "video": { "hdmi_in": 1, "hdmi_out": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 4 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7A035", "vendor": "alinx", "name": "AX7A035", "price": { "value": 274.99, "currency": "GBP" } } ] }, { "mpn": "AX7A200-Carrier", "name": "AX7A200 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Artix-7/AX7A200B.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 2, "lanes": 4 } ], "video": { "hdmi_in": 1, "hdmi_out": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 4 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7A200", "vendor": "alinx", "name": "AX7A200", "price": { "value": 356.99, "currency": "GBP" } } ] }, { "mpn": "AX7Z010-Carrier", "name": "AX7Z010 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-development-Boards/Zynq-7000-SoC/AX7Z010B.html", "vendor": "alinx", "price": null, "eeprom": [ { "purpose": [ "user_data" ], "interface": "I2C", "size_kbits": 4, "part": "24LC04" }, { "purpose": [ "user_data" ], "interface": "I2C", "size_kbits": 4, "part": "24LC04" } ], "sensors": [ { "type": "temperature", "part": "LM75" } ], "video": { "hdmi_out": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "serial": { "can": 2, "rs485": 2 }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host" } ], "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 4 }, "features": { "battery_backed_rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7Z010", "vendor": "alinx", "name": "AX7Z010", "price": { "value": 216.99, "currency": "GBP" } } ] }, { "mpn": "AX7Z020-Carrier", "name": "AX7Z020 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-development-Boards/Zynq-7000-SoC/AX7Z020B.html", "vendor": "alinx", "price": null, "eeprom": [ { "purpose": [ "user_data" ], "interface": "I2C", "size_kbits": 4, "part": "24LC04" }, { "purpose": [ "user_data" ], "interface": "I2C", "size_kbits": 4, "part": "24LC04" } ], "sensors": [ { "type": "temperature", "part": "LM75" } ], "video": { "hdmi_out": 1, "mipi_csi": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "serial": { "can": 2, "rs485": 2 }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host" } ], "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 4 }, "features": { "battery_backed_rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7Z020", "vendor": "alinx", "name": "AX7Z020", "price": { "value": 246.99, "currency": "GBP" } } ] }, { "mpn": "AX7Z035-Carrier", "name": "AX7Z035 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-development-Boards/Zynq-7000-SoC/AX7Z035B.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 2, "lanes": 4 } ], "video": { "hdmi_in": 1, "hdmi_out": 1, "mipi_csi": 1 }, "networking": { "sfp_plus": 4, "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 4 } ], "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 1 }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 4 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7Z035", "vendor": "alinx", "name": "AX7Z035", "price": { "value": 793.99, "currency": "GBP" } } ] }, { "mpn": "AX7Z100-Carrier", "name": "AX7Z100 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-development-Boards/Zynq-7000-SoC/AX7Z100B.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 2, "lanes": 8 } ], "video": { "hdmi_in": 1, "hdmi_out": 1, "mipi_csi": 1 }, "networking": { "sfp_plus": 4, "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 4 } ], "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 1 }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 4 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AX7Z100", "vendor": "alinx", "name": "AX7Z100", "price": { "value": 1135.99, "currency": "GBP" } } ] }, { "mpn": "AXAU15-Carrier", "name": "AXAU15 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Artix-UltraScale-plus/AXAU15.html", "vendor": "alinx", "price": null, "eeprom": [ { "purpose": [ "user_data" ], "interface": "I2C", "size_kbits": 4, "part": "24LC04" } ], "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 4, "lanes": 4 } ], "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2, "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.2, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "_notes_html": "VADJ for the FMC HPC connector is generated by a dedicated ETA1471 regulator (U175) and defaults to 1.8 V; a jumper cap selects 1.2 V instead (discrete 1.2 V / 1.8 V \u2014 the board does not read the FMC IPMI EEPROM). Note the FMC LA signals connect to FPGA banks 64/65 on the SoM, which are powered at 1.8 V by default.
", "_notes_md": "VADJ for the FMC HPC connector is generated by a dedicated ETA1471 regulator (U175) and defaults to 1.8 V; a jumper cap selects 1.2 V instead (discrete 1.2 V / 1.8 V \u2014 the board does not read the FMC IPMI EEPROM). Note the FMC LA signals connect to FPGA banks 64/65 on the SoM, which are powered at 1.8 V by default.", "_class": "carrier", "_used_in_kits": [ { "mpn": "AXAU15", "vendor": "alinx", "name": "AXAU15", "price": { "value": 689, "currency": "USD" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "AXAU25-Carrier", "name": "AXAU25 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Artix-UltraScale-plus/AXAU25.html", "vendor": "alinx", "price": null, "eeprom": [ { "purpose": [ "user_data" ], "interface": "I2C", "size_kbits": 4, "part": "24LC04" } ], "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 3, "lanes": 4 } ], "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 2, "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.2, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "_notes_html": "VADJ for the FMC HPC connector is one of four outputs of the carrier's ETA1471FT2G DC/DC converters and defaults to 1.8 V; a jumper cap selects 1.2 V instead (discrete 1.2 V / 1.8 V \u2014 the board does not read the FMC IPMI EEPROM). The FMC LA signals connect to FPGA banks 64/65 on the SoM, which operate at 1.8 V.
", "_notes_md": "VADJ for the FMC HPC connector is one of four outputs of the carrier's ETA1471FT2G DC/DC converters and defaults to 1.8 V; a jumper cap selects 1.2 V instead (discrete 1.2 V / 1.8 V \u2014 the board does not read the FMC IPMI EEPROM). The FMC LA signals connect to FPGA banks 64/65 on the SoM, which operate at 1.8 V.", "_class": "carrier", "_used_in_kits": [ { "mpn": "AXAU25", "vendor": "alinx", "name": "AXAU25", "price": { "value": 752.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "AXKU042-Carrier", "name": "AXKU042 Base Board", "status": "active", "url": "https://www.en.alinx.com/detail/562", "vendor": "alinx", "price": null, "eeprom": [ { "purpose": [ "user_data" ], "interface": "I2C", "size_kbits": 4, "part": "24LC04" } ], "sensors": [ { "type": "temperature", "part": "LM75A" } ], "pcie": [ { "type": "Edge", "gen": 3, "lanes": 8 } ], "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "fmc": [ { "slot": "HPC", "type": "hpc" }, { "slot": "LPC0", "type": "lpc" }, { "slot": "LPC1", "type": "lpc" } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 2 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AXKU042", "vendor": "alinx", "name": "AXKU042", "price": { "value": 1066.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "LPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "LPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-2V5", "vendor": "opsero", "name": "Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "LPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-2V5", "vendor": "opsero", "name": "Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "LPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-2V5", "vendor": "opsero", "name": "Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "LPC0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "LPC1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "LPC0", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "LPC1", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "LPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "LPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-2V5", "vendor": "opsero", "name": "Robust Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "LPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-2V5", "vendor": "opsero", "name": "Robust Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "LPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-2V5", "vendor": "opsero", "name": "Robust Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "LPC0", "verdict": "partial", "summary": "1 of 2: Port 0 (x1 of x4)", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "LPC0", "verdict": "partial", "summary": "1 of 4: Port 0", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "LPC0", "verdict": "partial", "summary": "1 of 6: SpaceFibre Port 1", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "LPC0", "verdict": "partial", "summary": "1 of 2: SSD Slot 1 (x1 of x4)", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "LPC0", "verdict": "partial", "summary": "1 of 2: M.2 Slot 1 (x1 of x4)", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "LPC0", "verdict": "partial", "summary": "1 of 4: Port 0", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" } ] }, { "mpn": "AXKU15-Carrier", "name": "AXKU15 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Kintex-UltraScale-plus/AXKU15.html", "vendor": "alinx", "price": null, "eeprom": [ { "purpose": [ "user_data" ], "interface": "I2C", "size_kbits": 4, "part": "24LC04" } ], "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 3, "lanes": 16 } ], "video": { "mipi_csi": 2 }, "networking": { "qsfp28": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "fmc": [ { "slot": "HPC0", "type": "hpc", "vadj_min": 1.8, "vadj_max": 1.8 }, { "slot": "HPC1", "type": "hpc", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 4 }, "_notes_html": "Each FMC HPC slot has its own VADJ rail (FMC1_VADJ from an ETA1471, FMC2_VADJ from an SGM61163), both 1.8 V by default \u2014 matching the 1.8 V level standard of the FMC banks. The user manual documents no jumper or programming mechanism for changing these rails, so treat VADJ as fixed at 1.8 V; the board does not read the FMC IPMI EEPROM.
", "_notes_md": "Each FMC HPC slot has its own VADJ rail (FMC1_VADJ from an ETA1471, FMC2_VADJ from an SGM61163), both 1.8 V by default \u2014 matching the 1.8 V level standard of the FMC banks. The user manual documents no jumper or programming mechanism for changing these rails, so treat VADJ as fixed at 1.8 V; the board does not read the FMC IPMI EEPROM.", "_class": "carrier", "_used_in_kits": [ { "mpn": "AXKU15", "vendor": "alinx", "name": "AXKU15", "price": { "value": 4917.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC0", "verdict": "partial", "summary": "3 of 4: Port 0, Port 1, Port 3", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC1", "verdict": "partial", "summary": "3 of 4: Port 0, Port 2, Port 3", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC0", "verdict": "partial", "summary": "1 of 2: AD9627 U1 (channels 1-2)", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC1", "verdict": "partial", "summary": "1 of 2: AD9627 U2 (channels 3-4)", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC0", "verdict": "partial", "summary": "3 of 4: Port 0, Port 1, Port 3", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC1", "verdict": "partial", "summary": "3 of 4: Port 0, Port 2, Port 3", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "AXKU3-Carrier", "name": "AXKU3 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Kintex-UltraScale-plus/AXKU3.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75A" } ], "pcie": [ { "type": "Edge", "gen": 3, "lanes": 8 } ], "video": { "mipi_csi": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 1, "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 4 }, "features": { "battery_backed_rtc": true }, "_notes_html": "The FMC HPC connector is supplied by a dedicated V_ADJ DC/DC rail, 1.8 V by default \u2014 matching the 1.8 V level standard of FMC banks 64/65. The user manual documents no jumper or programming mechanism for changing this rail, so treat VADJ as fixed at 1.8 V; the board does not read the FMC IPMI EEPROM.
", "_notes_md": "The FMC HPC connector is supplied by a dedicated V_ADJ DC/DC rail, 1.8 V by default \u2014 matching the 1.8 V level standard of FMC banks 64/65. The user manual documents no jumper or programming mechanism for changing this rail, so treat VADJ as fixed at 1.8 V; the board does not read the FMC IPMI EEPROM.", "_class": "carrier", "_used_in_kits": [ { "mpn": "AXKU3", "vendor": "alinx", "name": "AXKU3", "price": { "value": 875.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 4: Port 2, Port 3", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "partial", "summary": "1 of 2: AD9627 U2 (channels 3-4)", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 4: Port 2, Port 3", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "AXKU5-Carrier", "name": "AXKU5 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Kintex-UltraScale-plus/AXKU5.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75A" } ], "pcie": [ { "type": "Edge", "gen": 3, "lanes": 8 } ], "video": { "mipi_csi": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Mini-B", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 1, "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 4 }, "features": { "battery_backed_rtc": true }, "_notes_html": "The FMC HPC LA signals connect to FPGA HP banks 64/65; per the user guide (Part 3.4) the I/O level standard is 1.8 V by default. The bank supply is the carrier-generated V_ADJ rail (ETA1471 DC-DC, Part 3.11) \u2014 no jumper, system controller, or programming procedure is documented, so VADJ should be treated as fixed at 1.8 V.
", "_notes_md": "The FMC HPC LA signals connect to FPGA HP banks 64/65; per the user guide (Part 3.4) the I/O level standard is 1.8 V by default. The bank supply is the carrier-generated V_ADJ rail (ETA1471 DC-DC, Part 3.11) \u2014 no jumper, system controller, or programming procedure is documented, so VADJ should be treated as fixed at 1.8 V.", "_class": "carrier", "_used_in_kits": [ { "mpn": "AXKU5", "vendor": "alinx", "name": "AXKU5", "price": { "value": 1025.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 4: Port 2, Port 3", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "partial", "summary": "1 of 2: AD9627 U2 (channels 3-4)", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 4: Port 2, Port 3", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "AXRF47-Carrier", "name": "AXRF47 Base Board", "status": "active", "url": "https://www.en.alinx.com/detail/763", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature" } ], "clocking": { "programmable": true }, "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ], "lanes": 1 } ], "networking": { "sfp28": 1, "qsfp28": 1, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host" } ], "usb_bridge": [ { "connector": "Type-C", "functions": [ "uart" ] } ], "storage": { "microsd": 1 }, "user_io": { "leds": 4 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AXRF47", "vendor": "alinx", "name": "AXRF47", "price": { "value": 13631.99, "currency": "GBP" } } ] }, { "mpn": "AXRF49-Carrier", "name": "AXRF49 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-RFSoC/AXRF49.html", "vendor": "alinx", "price": null, "clocking": { "programmable": true }, "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "displayport": 1 }, "networking": { "qsfp28": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "otg" } ], "usb_bridge": [ { "connector": "Type-C", "functions": [ "jtag", "uart" ] } ], "expansion": { "fmc": [ { "slot": "FMCP", "type": "fmcp", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 4 }, "_notes_html": "The FMC+ user I/O (69 differential pairs) routes to HP banks 64/65/66, which operate at a fixed 1.8 V supplied by the carrier (user guide sections 2.11 and 3.10). No jumper or programmable VADJ selection mechanism is documented.
", "_notes_md": "The FMC+ user I/O (69 differential pairs) routes to HP banks 64/65/66, which operate at a fixed 1.8 V supplied by the carrier (user guide sections 2.11 and 3.10). No jumper or programmable VADJ selection mechanism is documented.", "_class": "carrier", "_used_in_kits": [ { "mpn": "AXRF49", "vendor": "alinx", "name": "AXRF49", "price": { "value": 20215.99, "currency": "GBP" } } ] }, { "mpn": "AXRF67-Carrier", "name": "AXRF67 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-RFSoC/AXRF67.html", "vendor": "alinx", "price": null, "clocking": { "programmable": true, "sma_clock_in": 1, "sma_clock_out": 1 }, "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ], "gen": 2, "lanes": 2 } ], "video": { "displayport": 1 }, "networking": { "sfp_plus": 1, "qsfp28": 1, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host" } ], "usb_bridge": [ { "connector": "Type-C", "functions": [ "jtag", "uart" ] } ], "expansion": { "pmod": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 4 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AXRF67", "vendor": "alinx", "name": "AXRF67", "price": { "value": 9534.99, "currency": "GBP" } } ] }, { "mpn": "AXU15EG-Carrier", "name": "AXU15EG Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/AXU15EGB.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "displayport": 1, "mipi_csi": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "serial": { "can": 2, "rs485": 2 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 2 }, { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 2 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "gpio_header": 1, "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 1, "pushbuttons": 2 }, "features": { "battery_backed_rtc": true }, "_notes_html": "The FMC user I/O (36 differential pairs) routes to SoM banks 66/67, whose VCCO is supplied by the carrier's fixed +1.8 V rail (shared with Ethernet and USB 2.0; user guide Parts 3.12 and 3.20). No jumper or programmable VADJ selection mechanism is documented, so VADJ is fixed at 1.8 V.
", "_notes_md": "The FMC user I/O (36 differential pairs) routes to SoM banks 66/67, whose VCCO is supplied by the carrier's fixed +1.8 V rail (shared with Ethernet and USB 2.0; user guide Parts 3.12 and 3.20). No jumper or programmable VADJ selection mechanism is documented, so VADJ is fixed at 1.8 V.", "_class": "carrier", "_used_in_kits": [ { "mpn": "AXU15EG", "vendor": "alinx", "name": "AXU15EG", "price": { "value": 2049.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "AXU2CG-E-Carrier", "name": "AXU2CG-E Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/AXU2CGB-E.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "displayport": 1, "mipi_csi": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "serial": { "can": 2, "rs485": 2 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 2 }, { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 2 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "features": { "battery_backed_rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AXU2CG-E", "vendor": "alinx", "name": "AXU2CG-E", "price": { "value": 493.99, "currency": "GBP" } } ] }, { "mpn": "AXU3EG-Carrier", "name": "AXU3EG Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/AXU3EGB.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "displayport": 1, "mipi_csi": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "serial": { "can": 2, "rs485": 2 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 2 }, { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 2 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "features": { "battery_backed_rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AXU3EG", "vendor": "alinx", "name": "AXU3EG", "price": { "value": 739.99, "currency": "GBP" } } ] }, { "mpn": "AXU4EV-E-Carrier", "name": "AXU4EV-E Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/AXU4EVB-E.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "displayport": 1, "mipi_csi": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "serial": { "can": 2, "rs485": 2 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 2 }, { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 2 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "features": { "battery_backed_rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AXU4EV-E", "vendor": "alinx", "name": "AXU4EV-E", "price": { "value": 916.99, "currency": "GBP" } } ] }, { "mpn": "AXU4EV-P-Carrier", "name": "AXU4EV-P Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/AXU4EVB-P.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 3, "lanes": 2 } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "hdmi_in": 1, "hdmi_out": 1, "displayport": 1, "mipi_csi": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "serial": { "can": 2, "rs485": 2 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 4 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "fmc": [ { "slot": "LPC", "type": "lpc", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 1, "pushbuttons": 2 }, "features": { "battery_backed_rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AXU4EV-P", "vendor": "alinx", "name": "AXU4EV-P", "price": { "value": 1053.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "LPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "LPC", "verdict": "partial", "summary": "3 of 4: Port 0, Port 1, Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "LPC", "verdict": "partial", "summary": "3 of 4: Port 0, Port 1, Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "AXU5EV-E-Carrier", "name": "AXU5EV-E Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/AXU5EVB-E.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "displayport": 1, "mipi_csi": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "serial": { "can": 2, "rs485": 2 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 2 }, { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 2 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "gpio_header": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "features": { "battery_backed_rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AXU5EV-E", "vendor": "alinx", "name": "AXU5EV-E", "price": { "value": 1093.99, "currency": "GBP" } } ] }, { "mpn": "AXU5EVB-P-Carrier", "name": "AXU5EVB-P Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/AXU5EVB-P.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 3, "lanes": 2 } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ], "gen": 3, "lanes": 4 } ], "video": { "hdmi_in": 1, "hdmi_out": 1, "displayport": 1, "mipi_csi": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "serial": { "can": 2, "rs485": 2 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 4 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "fmc": [ { "slot": "LPC", "type": "lpc", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 1, "pushbuttons": 2 }, "features": { "rtc": true }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AXU5EVB-P", "vendor": "alinx", "name": "AXU5EVB-P", "price": { "value": 1288, "currency": "USD" } } ], "_compatible_fmc_cards": [ { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "LPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "LPC", "verdict": "partial", "summary": "3 of 4: Port 0, Port 1, Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "LPC", "verdict": "partial", "summary": "3 of 4: Port 0, Port 1, Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "AXU9EG-Carrier", "name": "AXU9EG Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/AXU9EGB.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "displayport": 1, "mipi_csi": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "serial": { "can": 2, "rs485": 2 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 2 }, { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 2 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "gpio_header": 1, "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 1, "pushbuttons": 2 }, "features": { "battery_backed_rtc": true }, "_notes_html": "The FMC user I/O (36 differential pairs) routes to SoM banks 66/67, whose VCCO is supplied by the carrier's fixed +1.8 V rail (shared with Ethernet and USB 2.0; user guide Parts 3.12 and 3.20). No jumper or programmable VADJ selection mechanism is documented, so VADJ is fixed at 1.8 V.
", "_notes_md": "The FMC user I/O (36 differential pairs) routes to SoM banks 66/67, whose VCCO is supplied by the carrier's fixed +1.8 V rail (shared with Ethernet and USB 2.0; user guide Parts 3.12 and 3.20). No jumper or programmable VADJ selection mechanism is documented, so VADJ is fixed at 1.8 V.", "_class": "carrier", "_used_in_kits": [ { "mpn": "AXU9EG", "vendor": "alinx", "name": "AXU9EG", "price": { "value": 1831.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "AXVU13G-Carrier", "name": "AXVU13G Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Virtex-UltraScale-plus/AXVU13G.html", "vendor": "alinx", "price": null, "high_speed_io": [ { "form": "SMA", "lanes": 8, "transceiver": "GTY" } ], "networking": { "qsfp28": 7, "qsfp_dd": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ] } ], "expansion": { "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.8, "vadj_max": 1.8 }, { "slot": "FMCP", "type": "fmcp", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 1, "dip_switches": 1 }, "_notes_html": "VADJ is fixed at 1.8 V on both FMC sites. Each site has its own rail \u2014 FMC1_VADJ (3 A) for the FMC+ (J23) and FMC2_VADJ (3 A) for the FMC HPC (J24) \u2014 both generated by a dual-output regulator (U38, EZ8345). The user guide documents no jumper or programmable selection mechanism, and the board has no system controller, so FMC modules requiring other VADJ voltages are not supported without board rework.
", "_notes_md": "VADJ is fixed at 1.8 V on both FMC sites. Each site has its own rail \u2014 FMC1_VADJ (3 A) for the FMC+ (J23) and FMC2_VADJ (3 A) for the FMC HPC (J24) \u2014 both generated by a dual-output regulator (U38, EZ8345). The user guide documents no jumper or programmable selection mechanism, and the board has no system controller, so FMC modules requiring other VADJ voltages are not supported without board rework.", "_class": "carrier", "_used_in_kits": [ { "mpn": "AXVU13G", "vendor": "alinx", "name": "AXVU13G", "price": { "value": 13658.99, "currency": "GBP" } } ] }, { "mpn": "AXW47-Carrier", "name": "AXW47 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-RFSoC/AXW47.html", "vendor": "alinx", "price": null, "flash": [ { "type": "QSPI", "size_mb": 64 }, { "type": "QSPI", "size_mb": 64 } ], "clocking": { "programmable": true }, "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] }, { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] }, { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] }, { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "networking": { "sfp_plus": 1, "qsfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-C", "speed": "3.0", "role": "otg", "ports": 2 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ], "ports": 2 } ], "storage": { "sd": 1 }, "user_io": { "leds": 12, "pushbuttons": 5 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "AXW47", "vendor": "alinx", "name": "AXW47", "price": { "value": 13317.99, "currency": "GBP" } } ] }, { "mpn": "HEA13-Carrier", "name": "HEA13 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/FPGA-Development-Boards/Virtex-UltraScale-plus/HEA13.html", "vendor": "alinx", "price": null, "clocking": { "sma_clock_in": 2 }, "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] }, { "key": "E-key", "direction": "socket", "interfaces": [ "PCIe", "USB" ] } ], "video": { "displayport": 1 }, "networking": { "qsfp28": 4, "ethernet": [ { "speed": 1000, "ports": 1 }, { "speed": 5000, "ports": 1, "endpoint": "rj45" }, { "speed": 10000, "ports": 1, "endpoint": "rj45" } ] }, "usb": [ { "connector": "Type-C", "speed": "3.2", "role": "otg", "ports": 2 } ], "usb_bridge": [ { "connector": "Type-C", "functions": [ "uart" ] } ], "expansion": { "gpio_header": 1, "fmc": [ { "slot": "FMCP0", "type": "fmcp", "vadj_min": 1.8, "vadj_max": 1.8 }, { "slot": "FMCP1", "type": "fmcp", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "storage": { "microsd": 2 }, "user_io": { "leds": 3, "pushbuttons": 3 }, "_notes_html": "VADJ is fixed at 1.8 V on both FMC+ sites \u2014 the user guide states the FMC I/O level standard is 1.8 V (FMC1+ on banks 69/70/71, FMC2+ on the other HP banks of the VU13P, which only supports up to 1.8 V VCCO). No jumper, programmable regulator, or FMC EEPROM auto-negotiation is documented; the on-board MCU only sequences power for the Jetson AGX site.
", "_notes_md": "VADJ is fixed at 1.8 V on both FMC+ sites \u2014 the user guide states the FMC I/O level standard is 1.8 V (FMC1+ on banks 69/70/71, FMC2+ on the other HP banks of the VU13P, which only supports up to 1.8 V VCCO). No jumper, programmable regulator, or FMC EEPROM auto-negotiation is documented; the on-board MCU only sequences power for the Jetson AGX site.", "_class": "carrier", "_used_in_kits": [ { "mpn": "HEA13", "vendor": "alinx", "name": "HEA13", "price": { "value": 20488.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "FMCP0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "FMCP1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "FMCP0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "FMCP1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "FMCP0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "FMCP1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "FMCP0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "FMCP1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "FMCP0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "FMCP1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "FMCP0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "FMCP1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "FMCP0", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "FMCP1", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "FMCP0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "FMCP1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "FMCP0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "FMCP1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "FMCP0", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "FMCP1", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "K24-IO-CC", "name": "K24 IO Carrier Card", "status": "eol", "url": "https://www.tria-technologies.com/products/k24-development-kit/", "vendor": "tria", "price": null, "eeprom": [ { "purpose": [ "mac_address", "unique_id" ], "interface": "I2C", "size_kbits": 2, "part": "AT24MAC402" } ], "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host" } ], "usb_bridge": [ { "connector": "Type-C", "functions": [ "jtag", "uart" ] } ], "expansion": { "pmod": 1, "click": 2 }, "storage": { "microsd": 1 }, "user_io": { "leds": 6, "rgb_leds": 2, "pushbuttons": 4, "dip_switches": 4 }, "_notes_html": "The carrier card carries the Kria K24 SOM on a 240-pin connector (CON1). It provides\n10/100/1000 Ethernet (Microchip KSZ9131RNXI PHY), a USB 2.0 Type-A host port\n(USB3321C PHY), a shared USB Type-C JTAG/UART debug port, microSD, two HSIO TXR2\nhigh-speed expansion sites, two MikroE Click sites, and a Type 1A Pmod site.
\nMPSoC boot mode is selected with the Boot Mode Switch SW1 (default M[3:0] = 0010,\nMaster SPI flash):
\n| Boot mode | \nM[3:0] | \nSW1 (1-2-3-4) | \n
|---|---|---|
| Master SPI flash | \n0010 | \nON-ON-OFF-ON | \n
| microSD card | \n0101 | \nON-OFF-ON-OFF | \n
| JTAG | \n0000 | \nON-ON-ON-ON | \n
FMC V-ADJ is generated by a dedicated, dynamically adjustable DC/DC converter; factory default is 1.8 V with 2.5 V and 3.3 V options. The voltage is changed by serial commands on the power manager (BMC) console and can be stored in the power manager's non-volatile memory - the board does not read the FMC IPMI EEPROM automatically.
", "_notes_md": "FMC V-ADJ is generated by a dedicated, dynamically adjustable DC/DC converter; factory default is 1.8 V with 2.5 V and 3.3 V options. The voltage is changed by serial commands on the power manager (BMC) console and can be stored in the power manager's non-volatile memory - the board does not read the FMC IPMI EEPROM automatically.", "_class": "carrier", "_compatible_soms": [ { "mpn": "KRM-3Z7020-C1-XBAB-x", "vendor": "knowres", "name": "KRM-3Z7020 CLG SoC Module \u2014 C1 XBAB-x", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7020-C2-XBAB-x", "vendor": "knowres", "name": "KRM-3Z7020 CLG SoC Module \u2014 C2 XBAB-x", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7020-I1-XBAB-x", "vendor": "knowres", "name": "KRM-3Z7020 CLG SoC Module \u2014 I1 XBAB-x", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7020-I2-XBAB-x", "vendor": "knowres", "name": "KRM-3Z7020 CLG SoC Module \u2014 I2 XBAB-x", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7030-C1-XDAB-x", "vendor": "knowres", "name": "KRM-3Z7030 FFG SoC Module \u2014 C1 XDAB-x", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7030-C2-XDAB-x", "vendor": "knowres", "name": "KRM-3Z7030 FFG SoC Module \u2014 C2 XDAB-x", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7030-I1-XDAB-x", "vendor": "knowres", "name": "KRM-3Z7030 FFG SoC Module \u2014 I1 XDAB-x", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7030-I2-XDAB-x", "vendor": "knowres", "name": "KRM-3Z7030 FFG SoC Module \u2014 I2 XDAB-x", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7045-C1-XDAB-F", "vendor": "knowres", "name": "KRM-3Z7045 FFG SoC Module \u2014 C1 XDAB-F", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7045-C2-XDAB-F", "vendor": "knowres", "name": "KRM-3Z7045 FFG SoC Module \u2014 C2 XDAB-F", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7045-I1-XDAB-F", "vendor": "knowres", "name": "KRM-3Z7045 FFG SoC Module \u2014 I1 XDAB-F", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3Z7045-I2-XDAB-F", "vendor": "knowres", "name": "KRM-3Z7045 FFG SoC Module \u2014 I2 XDAB-F", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3eZU4CG-E1-XBCB-x", "vendor": "knowres", "name": "KRM-3eZU4CG MPSOC Module \u2014 E1 XBCB-x (4GB PS RAM, 1GB PL RAM)", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-3eZU4CG-E1-XCCB-x", "vendor": "knowres", "name": "KRM-3eZU4CG MPSOC Module \u2014 E1 XCCB-x (8GB PS RAM, 2GB PL RAM)", "verified_by": "vendor", "notes": "" } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "KRC-4700-KIT", "name": "KRC-4700 KIT", "status": "active", "url": "https://www.knowres.com/product/krc-4700-kit/", "vendor": "knowres", "price": { "value": 2760, "currency": "EUR" }, "clocking": { "programmable": true }, "networking": { "qsfp_plus": 4, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ] } ], "storage": { "microsd": 1 }, "_class": "carrier", "_compatible_soms": [ { "mpn": "KRM-4ZU25DR-1HY", "vendor": "knowres", "name": "KRM-4ZU25DR RFSoC Module", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-4ZU27DR-1E", "vendor": "knowres", "name": "KRM-4ZU27DR RFSoC Module \u2014 1E", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-4ZU27DR-1I", "vendor": "knowres", "name": "KRM-4ZU27DR RFSoC Module \u2014 1I", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-4ZU27DR-2E", "vendor": "knowres", "name": "KRM-4ZU27DR RFSoC Module \u2014 2E", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-4ZU27DR-2I", "vendor": "knowres", "name": "KRM-4ZU27DR RFSoC Module \u2014 2I", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-4ZU47DR-1E", "vendor": "knowres", "name": "KRM-4ZU47DR RFSoC Module \u2014 1E", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-4ZU47DR-1I", "vendor": "knowres", "name": "KRM-4ZU47DR RFSoC Module \u2014 1I", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-4ZU47DR-2E", "vendor": "knowres", "name": "KRM-4ZU47DR RFSoC Module \u2014 2E", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-4ZU47DR-2I", "vendor": "knowres", "name": "KRM-4ZU47DR RFSoC Module \u2014 2I", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-4ZU48DR-2E", "vendor": "knowres", "name": "KRM-4ZU48DR RFSoC Module \u2014 2E", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-4ZU48DR-2I", "vendor": "knowres", "name": "KRM-4ZU48DR RFSoC Module \u2014 2I", "verified_by": "vendor", "notes": "" } ] }, { "mpn": "KRC-6000-KIT", "name": "KRC-6000 KIT", "status": "active", "url": "https://www.knowres.com/product/krc-6000-kit/", "vendor": "knowres", "price": { "value": 3760, "currency": "EUR" }, "clocking": { "programmable": true }, "networking": { "qsfp_plus": 1, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ] } ], "storage": { "microsd": 1 }, "_class": "carrier", "_compatible_soms": [ { "mpn": "KRM-6ZU49DR-2E", "vendor": "knowres", "name": "KRM-6ZU49DR RFSoC Module \u2014 2E", "verified_by": "vendor", "notes": "" }, { "mpn": "KRM-6ZU49DR-2I", "vendor": "knowres", "name": "KRM-6ZU49DR RFSoC Module \u2014 2I", "verified_by": "vendor", "notes": "" } ] }, { "mpn": "KV260-Carrier", "name": "Kria KV260 Vision Carrier", "status": "active", "url": "https://www.amd.com/en/products/system-on-modules/kria/k26/kv260-vision-starter-kit.html", "vendor": "amd-xilinx", "price": null, "video": { "hdmi_out": 1, "displayport": 1, "mipi_csi": 3 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 4 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "expansion": { "pmod": 1 }, "storage": { "microsd": 1 }, "features": { "secure_element": true }, "_class": "carrier", "_compatible_soms": [ { "mpn": "SM-K26-XCL2GC", "vendor": "amd-xilinx", "name": "Kria K26 SOM", "verified_by": "vendor", "notes": "" } ], "_used_in_kits": [ { "mpn": "SK-KV260-G", "vendor": "amd-xilinx", "name": "Kria KV260 Vision AI Starter Kit", "price": { "value": 249, "currency": "USD" } } ] }, { "mpn": "MA-ST3-W", "name": "Mars ST3", "status": "active", "url": "https://www.enclustra.com/en/products/base-boards/mars-st3/", "vendor": "enclustra", "price": { "value": 219, "currency": "USD" }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1, "endpoint": "rj45" } ] }, "video": { "hdmi_out": 1, "displayport": 1 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "expansion": { "pmod": 1 }, "storage": { "microsd": 1 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "QSK-DK-MA-XU3-2CG-ST3", "vendor": "enclustra", "name": "Mars XU3 Design-in Kit", "price": { "value": 487, "currency": "USD" } } ] }, { "mpn": "ME-PE1-200-C", "name": "Mercury+ PE1-200", "status": "eol", "url": "https://www.enclustra.com/en/products/base-boards/mercury-pe1-300-400/", "vendor": "enclustra", "price": { "value": 506, "currency": "USD" }, "pcie": [ { "type": "Edge", "gen": 2, "lanes": 4 } ], "networking": { "ethernet": [ { "speed": 1000, "ports": 2, "endpoint": "rj45" } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 4 }, { "connector": "Micro-B", "speed": "3.0", "role": "device" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "storage": { "microsd": 1 }, "expansion": { "pmod": 3, "fmc": [ { "slot": "FMC1", "type": "lpc", "vadj_min": 1.8, "vadj_max": 3.3 } ] }, "_notes_html": "The Mercury+ PE1-200 (ME-PE1-200-C) is end of life (EOL); after stock depletion it will no longer be available. Enclustra recommends upgrading to the PE1-300 or PE1-400 variant.
\nThe available features depend on the equipped Mercury FPGA/SoC module and the selected PE1 board model. The -200 variant omits the low-jitter clock generator, system monitor, power control and current sense fitted on the -300/-400 variants.
\nFMC VADJ (VCC_ADJ) follows the module I/O voltage VCC_IO_B, selected by the I/O voltage selection jumpers on J2000: 3.3 V (VCC_3V3) or the module-dependent VCC_OUT_A / VCC_OUT_B supply outputs (typically 1.8-2.5 V; supported envelope 1.8-3.3 V depending on the mounted Mercury module). The factory default jumper positions (2-4, 8-10) apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.
", "_notes_md": "The Mercury+ PE1-200 (ME-PE1-200-C) is end of life (EOL); after stock depletion it will no longer be available. Enclustra recommends upgrading to the PE1-300 or PE1-400 variant.\n\nThe available features depend on the equipped Mercury FPGA/SoC module and the selected PE1 board model. The -200 variant omits the low-jitter clock generator, system monitor, power control and current sense fitted on the -300/-400 variants.\n\nFMC VADJ (VCC_ADJ) follows the module I/O voltage VCC_IO_B, selected by the I/O voltage selection jumpers on J2000: 3.3 V (VCC_3V3) or the module-dependent VCC_OUT_A / VCC_OUT_B supply outputs (typically 1.8-2.5 V; supported envelope 1.8-3.3 V depending on the mounted Mercury module). The factory default jumper positions (2-4, 8-10) apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.", "_class": "carrier" }, { "mpn": "ME-PE1-300-W", "name": "Mercury+ PE1-300", "status": "active", "url": "https://www.enclustra.com/en/products/base-boards/mercury-pe1-300-400/", "vendor": "enclustra", "price": { "value": 642, "currency": "USD" }, "pcie": [ { "type": "Edge", "gen": 2, "lanes": 4 }, { "type": "MiniPCIe-Full", "msata_capable": true } ], "clocking": { "programmable": true, "sma_clock_in": 1, "sma_clock_out": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2, "endpoint": "rj45" } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 4 }, { "connector": "Micro-B", "speed": "3.0", "role": "device" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "storage": { "microsd": 1 }, "expansion": { "pmod": 3, "fmc": [ { "slot": "FMC1", "type": "hpc", "vadj_min": 1.8, "vadj_max": 3.3 } ] }, "_notes_html": "The available features depend on the equipped Mercury FPGA/SoC module and the selected PE1 board model. The -300 variant fits a low-jitter clock generator, system monitor, power control and current sense. The SMA clock / MGT and SIM-card options are populated to order.
\nFMC VADJ (VCC_ADJ) follows the module I/O voltage VCC_IO_B, selected by the I/O voltage selection jumpers on J2000: 3.3 V (VCC_3V3) or the module-dependent VCC_OUT_A / VCC_OUT_B supply outputs (typically 1.8-2.5 V; supported envelope 1.8-3.3 V depending on the mounted Mercury module). The factory default jumper positions (2-4, 8-10) apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.
", "_notes_md": "The available features depend on the equipped Mercury FPGA/SoC module and the selected PE1 board model. The -300 variant fits a low-jitter clock generator, system monitor, power control and current sense. The SMA clock / MGT and SIM-card options are populated to order.\n\nFMC VADJ (VCC_ADJ) follows the module I/O voltage VCC_IO_B, selected by the I/O voltage selection jumpers on J2000: 3.3 V (VCC_3V3) or the module-dependent VCC_OUT_A / VCC_OUT_B supply outputs (typically 1.8-2.5 V; supported envelope 1.8-3.3 V depending on the mounted Mercury module). The factory default jumper positions (2-4, 8-10) apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.", "_class": "carrier" }, { "mpn": "ME-PE1-400-W", "name": "Mercury+ PE1-400", "status": "active", "url": "https://www.enclustra.com/en/products/base-boards/mercury-pe1-300-400/", "vendor": "enclustra", "price": { "value": 817, "currency": "USD" }, "pcie": [ { "type": "Edge", "gen": 2, "lanes": 4 }, { "type": "MiniPCIe-Full", "msata_capable": true } ], "clocking": { "programmable": true, "sma_clock_in": 1, "sma_clock_out": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2, "endpoint": "rj45" } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 4 }, { "connector": "Micro-B", "speed": "3.0", "role": "device" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "storage": { "microsd": 1 }, "expansion": { "pmod": 3, "fmc": [ { "slot": "FMC1", "type": "lpc", "vadj_min": 1.8, "vadj_max": 3.3 }, { "slot": "FMC2", "type": "lpc", "vadj_min": 1.8, "vadj_max": 3.3 } ] }, "_notes_html": "The available features depend on the equipped Mercury FPGA/SoC module and the selected PE1 board model. The -400 variant fits a low-jitter clock generator, system monitor, power control and current sense, and provides two FMC LPC connectors (where the -300 provides one FMC HPC). The SMA clock / MGT and SIM-card options are populated to order.
\nBoth FMC connectors share a single VADJ rail (VCC_ADJ), which follows the module I/O voltage VCC_IO_B, selected by the I/O voltage selection jumpers on J2000: 3.3 V (VCC_3V3) or the module-dependent VCC_OUT_A / VCC_OUT_B supply outputs (typically 1.8-2.5 V; supported envelope 1.8-3.3 V depending on the mounted Mercury module). The factory default jumper positions (2-4, 8-10) apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.
", "_notes_md": "The available features depend on the equipped Mercury FPGA/SoC module and the selected PE1 board model. The -400 variant fits a low-jitter clock generator, system monitor, power control and current sense, and provides two FMC LPC connectors (where the -300 provides one FMC HPC). The SMA clock / MGT and SIM-card options are populated to order.\n\nBoth FMC connectors share a single VADJ rail (VCC_ADJ), which follows the module I/O voltage VCC_IO_B, selected by the I/O voltage selection jumpers on J2000: 3.3 V (VCC_3V3) or the module-dependent VCC_OUT_A / VCC_OUT_B supply outputs (typically 1.8-2.5 V; supported envelope 1.8-3.3 V depending on the mounted Mercury module). The factory default jumper positions (2-4, 8-10) apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.", "_class": "carrier" }, { "mpn": "ME-PE1-C", "name": "Mercury+ PE1", "status": "active", "url": "https://www.enclustra.com/en/products/base-boards/mercury-pe1-300-400/", "vendor": "enclustra", "price": null, "pcie": [ { "type": "Edge", "gen": 2, "lanes": 4 } ], "networking": { "ethernet": [ { "speed": 1000, "ports": 2, "endpoint": "rj45" } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host", "ports": 4 }, { "connector": "Micro-B", "speed": "3.0", "role": "device" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "storage": { "microsd": 1 }, "expansion": { "pmod": 3 }, "_notes_html": "ME-PE1-C is the generic Mercury+ PE1 base-board article; the populated options \u2014 FMC LPC vs HPC count, clock generator, system monitor, mPCIe/mSATA holder, SMA/MGT and SIM-card options \u2014 depend on the selected board model (PE1-200 / PE1-300 / PE1-400). See the model-specific articles (ME-PE1-200-C, ME-PE1-300-W, ME-PE1-400-W) for the per-model feature set.
\nThe available features also depend on the equipped Mercury FPGA/SoC module.
\nThe FMC connector I/O pins connect directly to the FPGA/SoC on the Mercury module and run at the module I/O voltage: VCC_IO_A / VCC_IO_B are selected with jumper J1800 among 3.3 V (VCC_3V3) or the module-dependent VCC_OUT_A / VCC_OUT_B supply outputs. The factory default jumper positions (1-3, 9-11) apply no I/O voltage at all, so the I/O rails are unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM. See the model-specific articles for per-slot VADJ ranges.
", "_notes_md": "ME-PE1-C is the generic Mercury+ PE1 base-board article; the populated options \u2014 FMC LPC vs HPC count, clock generator, system monitor, mPCIe/mSATA holder, SMA/MGT and SIM-card options \u2014 depend on the selected board model (PE1-200 / PE1-300 / PE1-400). See the model-specific articles (ME-PE1-200-C, ME-PE1-300-W, ME-PE1-400-W) for the per-model feature set.\n\nThe available features also depend on the equipped Mercury FPGA/SoC module.\n\nThe FMC connector I/O pins connect directly to the FPGA/SoC on the Mercury module and run at the module I/O voltage: VCC_IO_A / VCC_IO_B are selected with jumper J1800 among 3.3 V (VCC_3V3) or the module-dependent VCC_OUT_A / VCC_OUT_B supply outputs. The factory default jumper positions (1-3, 9-11) apply no I/O voltage at all, so the I/O rails are unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM. See the model-specific articles for per-slot VADJ ranges.", "_class": "carrier" }, { "mpn": "ME-PE3-4S-C", "name": "Mercury+ PE3-4S", "status": "active", "url": "https://www.enclustra.com/en/products/base-boards/mercury-pe3/", "vendor": "enclustra", "price": { "value": 1149, "currency": "USD" }, "pcie": [ { "type": "Edge", "lanes": 8 } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe", "SATA" ] } ], "clocking": { "programmable": true }, "networking": { "sfp_plus": 4, "qsfp_plus": 1, "ethernet": [ { "speed": 1000, "ports": 2, "endpoint": "rj45" } ] }, "high_speed_io": [ { "form": "FireFly" } ], "video": { "hdmi_out": 1, "displayport": 1 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host" }, { "connector": "Type-C", "speed": "3.0", "role": "otg" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "storage": { "microsd": 1 }, "expansion": { "fmc": [ { "slot": "FMC1", "type": "hpc", "vadj_min": 1.2, "vadj_max": 3.3 } ] }, "_notes_html": "The available features depend on the equipped Mercury FPGA/SoC module. The -4S variant populates four SFP+ cages in addition to the QSFP+ cage and FMC HPC connector common to the PE3 family.
\nFMC VADJ (VCC_FMC_ADJ) follows the VCC_IO_BC rail, selected by the I/O voltage selection jumpers on J2100: 1.2 V (VCC_1V2), 3.3 V (VCC_3V3), or the module-dependent VCC_OUT_A / VCC_OUT_B supplies (supported envelope 1.2-3.3 V). The factory default jumper positions apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.
", "_notes_md": "The available features depend on the equipped Mercury FPGA/SoC module. The -4S variant populates four SFP+ cages in addition to the QSFP+ cage and FMC HPC connector common to the PE3 family.\n\nFMC VADJ (VCC_FMC_ADJ) follows the VCC_IO_BC rail, selected by the I/O voltage selection jumpers on J2100: 1.2 V (VCC_1V2), 3.3 V (VCC_3V3), or the module-dependent VCC_OUT_A / VCC_OUT_B supplies (supported envelope 1.2-3.3 V). The factory default jumper positions apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.", "_class": "carrier" }, { "mpn": "ME-PE3-C", "name": "Mercury+ PE3", "status": "active", "url": "https://www.enclustra.com/en/products/base-boards/mercury-pe3/", "vendor": "enclustra", "price": { "value": 1125, "currency": "USD" }, "pcie": [ { "type": "Edge", "lanes": 8 } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe", "SATA" ] } ], "clocking": { "programmable": true }, "networking": { "qsfp_plus": 1, "ethernet": [ { "speed": 1000, "ports": 2, "endpoint": "rj45" } ] }, "high_speed_io": [ { "form": "FireFly" } ], "video": { "hdmi_out": 1, "displayport": 1 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host" }, { "connector": "Type-C", "speed": "3.0", "role": "otg" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "storage": { "microsd": 1 }, "expansion": { "fmc": [ { "slot": "FMC1", "type": "hpc", "vadj_min": 1.2, "vadj_max": 3.3 } ] }, "_notes_html": "The available features depend on the equipped Mercury FPGA/SoC module. The base PE3 variant populates the QSFP+ cage and FMC HPC connector but omits the four SFP+ cages fitted on the PE3-4S variant.
\nFMC VADJ (VCC_FMC_ADJ) follows the VCC_IO_BC rail, selected by the I/O voltage selection jumpers on J2100: 1.2 V (VCC_1V2), 3.3 V (VCC_3V3), or the module-dependent VCC_OUT_A / VCC_OUT_B supplies (supported envelope 1.2-3.3 V). The factory default jumper positions apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.
", "_notes_md": "The available features depend on the equipped Mercury FPGA/SoC module. The base PE3 variant populates the QSFP+ cage and FMC HPC connector but omits the four SFP+ cages fitted on the PE3-4S variant.\n\nFMC VADJ (VCC_FMC_ADJ) follows the VCC_IO_BC rail, selected by the I/O voltage selection jumpers on J2100: 1.2 V (VCC_1V2), 3.3 V (VCC_3V3), or the module-dependent VCC_OUT_A / VCC_OUT_B supplies (supported envelope 1.2-3.3 V). The factory default jumper positions apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.", "_class": "carrier" }, { "mpn": "ME-ST1-W", "name": "Mercury+ ST1", "status": "active", "url": "https://www.enclustra.com/en/products/base-boards/mercury-st1/", "vendor": "enclustra", "price": { "value": 375, "currency": "USD" }, "clocking": { "programmable": true }, "networking": { "sfp_plus": 1, "ethernet": [ { "speed": 1000, "ports": 2, "endpoint": "rj45" } ] }, "video": { "hdmi_out": 1, "displayport": 1, "mipi_csi": 2, "mipi_dsi": 1 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host" }, { "connector": "Type-B", "speed": "3.0", "role": "device" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "expansion": { "fmc": [ { "slot": "HPC0", "type": "hpc", "vadj_min": 1.2, "vadj_max": 3.3 } ] }, "storage": { "microsd": 1 }, "_notes_html": "FMC VADJ (VCC_FMC_ADJ) is fed from the VCC_IO_B rail, selected by the I/O voltage selection jumpers on J1602: 1.2 V (VCC_1V2), 3.3 V (VCC_3V3), or the module-dependent VCC_OUT_A / VCC_OUT_B supplies (supported envelope 1.2-3.3 V). Enclustra's documents conflict on the factory default: the user manual (D-0000-456-001 V03) states that no I/O voltage is applied as shipped, yet the default jumper positions listed in both the manual and the schematic (R1.0) include 7-8, which sets VCC_IO_B \u2014 and hence VADJ \u2014 to 3.3 V; verify J1602 before powering an FMC card. The board does not read the FMC IPMI EEPROM.
", "_notes_md": "FMC VADJ (VCC_FMC_ADJ) is fed from the VCC_IO_B rail, selected by the I/O voltage selection jumpers on J1602: 1.2 V (VCC_1V2), 3.3 V (VCC_3V3), or the module-dependent VCC_OUT_A / VCC_OUT_B supplies (supported envelope 1.2-3.3 V). Enclustra's documents conflict on the factory default: the user manual (D-0000-456-001 V03) states that no I/O voltage is applied as shipped, yet the default jumper positions listed in both the manual and the schematic (R1.0) include 7-8, which sets VCC_IO_B \u2014 and hence VADJ \u2014 to 3.3 V; verify J1602 before powering an FMC card. The board does not read the FMC IPMI EEPROM.", "_class": "carrier", "_used_in_kits": [ { "mpn": "QSK-DK-ME-XU5-4EV-ST1", "vendor": "enclustra", "name": "Mercury XU5 Design-in Kit", "price": { "value": 975, "currency": "USD" } } ] }, { "mpn": "PL-ST11", "name": "Pluto ST11", "status": "active", "url": "https://www.enclustra.com/en/products/base-boards/pluto-st11/", "vendor": "enclustra", "price": null, "networking": { "ethernet": [ { "speed": 1000, "ports": 1, "endpoint": "rj45" } ] }, "m2": [ { "key": "E-key", "direction": "socket", "interfaces": [ "PCIe", "USB" ] } ], "video": { "displayport": 1 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "expansion": { "pmod": 1, "gpio_header": 1 }, "storage": { "microsd": 1 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "QSK-DK-PL-XZU20-3EG-ST11", "vendor": "enclustra", "name": "Pluto XZU20 Design-in Kit", "price": { "value": 2077, "currency": "USD" } } ] }, { "mpn": "TE0703-07", "name": "TE0703-07 Carrier", "status": "active", "url": "https://www.trenz-electronic.de/en/TE0703-Carrier-board-for-Trenz-Electronic-modules-with-4-x-5-cm-form-factor/TE0703-07", "vendor": "trenz", "price": { "value": 138.01, "currency": "USD" }, "clocking": { "programmable": true }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host" } ], "usb_bridge": [ { "connector": "Mini-B", "functions": [ "jtag", "uart" ] } ], "storage": { "microsd": 1 }, "user_io": { "leds": 4, "pushbuttons": 1, "dip_switches": 4 }, "_class": "carrier", "_compatible_soms": [ { "mpn": "TE0720-04-61C33MA", "vendor": "trenz", "name": "TE0720 \u2014 7Z020-1C, 1 GB DDR3", "verified_by": "vendor", "notes": "" }, { "mpn": "TE0820-05-4DE81MA", "vendor": "trenz", "name": "TE0820 \u2014 ZU4EV-1E, 2 GB DDR4", "verified_by": "vendor", "notes": "" } ], "_used_in_kits": [ { "mpn": "TE0720-04-61C33MAS", "vendor": "trenz", "name": "TE0720-04-61C33MAS Starter Kit", "price": { "value": 458.65, "currency": "USD" } }, { "mpn": "TE0820-05-4DE81MAS", "vendor": "trenz", "name": "TE0820-05-4DE81MAS Starter Kit", "price": { "value": 835.06, "currency": "USD" } } ] }, { "mpn": "TEB0716-01-A", "name": "TEB0716-01-A Carrier", "status": "active", "url": "https://www.trenz-electronic.de/en/Baseboard-for-TE0716/TEB0716-01-A", "vendor": "trenz", "price": { "value": 165.9, "currency": "USD" }, "clocking": { "programmable": true }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Micro-B", "speed": "2.0", "role": "otg" } ], "expansion": { "gpio_header": 1, "xadc_header": 1, "cruvi_ls": 1 }, "_class": "carrier" }, { "mpn": "TEB0724-02", "name": "TEB0724-02 Carrier", "status": "active", "url": "https://www.trenz-electronic.de/en/Baseboard-for-TE0724/TEB0724-02", "vendor": "trenz", "price": { "value": 151.96, "currency": "USD" }, "clocking": { "programmable": true }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "serial": { "can": 1 }, "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "expansion": { "pmod": 10 }, "user_io": { "leds": 7, "pushbuttons": 3 }, "_class": "carrier" }, { "mpn": "TEB0728-02", "name": "TEB0728-02 Carrier", "status": "active", "url": "https://www.trenz-electronic.de/en/Carrierboard-for-a-TE0728-Automotive-Zynq-7020-SoC-Module/TEB0728-02", "vendor": "trenz", "price": { "value": 179.84, "currency": "USD" }, "clocking": { "programmable": true }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "storage": { "sd": 1 }, "user_io": { "pushbuttons": 1 }, "_class": "carrier" }, { "mpn": "TEB0729-03A", "name": "TEB0729-03A Carrier", "status": "active", "url": "https://www.trenz-electronic.de/en/Carrier-board-for-TE0729-Zynq-7020-SoC-with-USB-A-Host-Connector/TEB0729-03A", "vendor": "trenz", "price": { "value": 124.07, "currency": "USD" }, "eeprom": [ { "purpose": [ "board_id" ], "interface": "I2C" }, { "purpose": [ "board_id" ], "interface": "I2C" } ], "clocking": { "programmable": true }, "networking": { "ethernet": [ { "speed": 100, "ports": 2 }, { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "storage": { "microsd": 1 }, "user_io": { "leds": 1, "pushbuttons": 1 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "TE0729-03-62I63MAS", "vendor": "trenz", "name": "TE0729 Starter Kit", "price": { "value": 458.65, "currency": "USD" } } ] }, { "mpn": "TEB0729-04-A", "name": "TEB0729-04-A Carrier", "status": "active", "url": "https://www.trenz-electronic.de/en/Carrier-board-for-TE0729-Zynq-7020-SoC-with-USB-A-Host-Connector/TEB0729-04-A", "vendor": "trenz", "price": { "value": 138.01, "currency": "USD" }, "eeprom": [ { "purpose": [ "board_id" ], "interface": "I2C" }, { "purpose": [ "board_id" ], "interface": "I2C" } ], "clocking": { "programmable": true }, "networking": { "ethernet": [ { "speed": 100, "ports": 2 }, { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "storage": { "microsd": 1 }, "user_io": { "leds": 1, "pushbuttons": 1 }, "_class": "carrier", "_compatible_soms": [ { "mpn": "TE0729-03-62I63MA", "vendor": "trenz", "name": "TE0729 \u2014 7Z020-2I, 512 MB DDR3L", "verified_by": "vendor", "notes": "" } ] }, { "mpn": "TEB0745-02", "name": "TEB0745-02 Carrier", "status": "active", "url": "https://www.trenz-electronic.de/en/Carrierboard-for-a-TE0745/TEB0745-02", "vendor": "trenz", "price": { "value": 354.1, "currency": "USD" }, "clocking": { "programmable": true }, "networking": { "sfp": 8, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "expansion": { "gpio_header": 12 }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 1 }, "features": { "battery_backed_rtc": true }, "_class": "carrier" }, { "mpn": "TEBF0808-05", "name": "TEBF0808-05 Carrier", "status": "active", "url": "https://www.trenz-electronic.de/en/UltraITX-Baseboard-for-Trenz-Electronic-TE080X-UltraSOM/TEBF0808-05", "vendor": "trenz", "price": { "value": 653.83, "currency": "USD" }, "flash": [ { "type": "eMMC", "size_mb": 4096 } ], "eeprom": [ { "purpose": [ "board_id", "user_data" ], "interface": "I2C", "size_kbits": 128, "part": "24LC128" }, { "purpose": [ "mac_address" ], "interface": "I2C", "size_kbits": 2, "part": "24AA025E48" }, { "purpose": [ "mac_address" ], "interface": "I2C", "size_kbits": 2, "part": "24AA025E48" }, { "purpose": [ "mac_address" ], "interface": "I2C", "size_kbits": 2, "part": "24AA025E48" } ], "clocking": { "programmable": true }, "pcie": [ { "type": "Slot", "lanes": 1 } ], "high_speed_io": [ { "form": "FireFly", "count": 2 } ], "video": { "displayport": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "serial": { "can": 1 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 2 }, { "connector": "Header", "speed": "3.0", "role": "host", "ports": 2 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ], "ports": 2 } ], "expansion": { "pmod": 3, "fmc": [ { "slot": "HPC", "type": "hpc" } ] }, "storage": { "sata": 1, "microsd": 1 }, "_class": "carrier", "_compatible_fmc_cards": [ { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-2V5", "vendor": "opsero", "name": "Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-2V5", "vendor": "opsero", "name": "Robust Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "1 of 2: Port 0 (x1 of x4)", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "1 of 4: Port 0", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "1 of 2: SSD Slot 1 (x1 of x4)", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "1 of 2: M.2 Slot 1 (x1 of x4)", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "1 of 4: Port 0", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" } ] }, { "mpn": "TEBF0818-02A", "name": "TEBF0818-02A Carrier", "status": "active", "url": "https://www.trenz-electronic.de/en/UltraITX-Basisboard-for-Trenz-Electronic-TE081X-UltraSOM/TEBF0818-02A", "vendor": "trenz", "price": { "value": 598.06, "currency": "USD" }, "flash": [ { "type": "eMMC", "size_mb": 8192 } ], "eeprom": [ { "purpose": [ "board_id", "user_data" ], "interface": "I2C", "size_kbits": 128, "part": "24LC128" }, { "purpose": [ "mac_address" ], "interface": "I2C", "size_kbits": 2, "part": "24AA025E48" }, { "purpose": [ "mac_address" ], "interface": "I2C", "size_kbits": 2, "part": "24AA025E48" }, { "purpose": [ "mac_address" ], "interface": "I2C", "size_kbits": 2, "part": "24AA025E48" } ], "clocking": { "programmable": true }, "pcie": [ { "type": "Slot", "lanes": 1 } ], "high_speed_io": [ { "form": "FireFly", "count": 2 } ], "video": { "displayport": 1 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "serial": { "can": 1 }, "usb": [ { "connector": "Type-A", "speed": "3.0", "role": "host", "ports": 2 }, { "connector": "Header", "speed": "3.0", "role": "host", "ports": 2 } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ], "ports": 2 } ], "expansion": { "pmod": 3, "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.2, "vadj_max": 1.8 } ] }, "storage": { "sata": 1, "microsd": 1 }, "_notes_html": "FMC VADJ supports 1.2 V / 1.5 V / 1.8 V (discrete values), generated by\nregulator U8 whose VID pins are driven by the System Controller CPLD\n(MachXO2, U17); DIP switch S5D is the documented user input for FMC_VADJ\nvoltage selection, interpreted by the CPLD firmware. The exact firmware\nmapping and boot default are documented on the Trenz wiki (TEBF0818 CPLD\nFirmware page), and no automatic FMC IPMI EEPROM negotiation is documented.\nThe FMC_VADJ rail also supplies the mated SoM's adjustable I/O banks via the\nB2B connectors.
", "_notes_md": "FMC VADJ supports 1.2 V / 1.5 V / 1.8 V (discrete values), generated by\nregulator U8 whose VID pins are driven by the System Controller CPLD\n(MachXO2, U17); DIP switch S5D is the documented user input for FMC_VADJ\nvoltage selection, interpreted by the CPLD firmware. The exact firmware\nmapping and boot default are documented on the Trenz wiki (TEBF0818 CPLD\nFirmware page), and no automatic FMC IPMI EEPROM negotiation is documented.\nThe FMC_VADJ rail also supplies the mated SoM's adjustable I/O banks via the\nB2B connectors.", "_class": "carrier", "_compatible_soms": [ { "mpn": "TE0813-02-3BE81-A", "vendor": "trenz", "name": "TE0813 \u2014 ZU3EG-1E, 4 GB DDR4", "verified_by": "vendor", "notes": "" }, { "mpn": "TE0817-02-7DE81-A", "vendor": "trenz", "name": "TE0817 \u2014 ZU7EV-1E, 4 GB DDR4", "verified_by": "vendor", "notes": "" }, { "mpn": "TE0818-02-9BE81-A", "vendor": "trenz", "name": "TE0818 \u2014 ZU9EG-1E, 4 GB DDR4", "verified_by": "vendor", "notes": "" }, { "mpn": "TE0818-02-9GI81-A", "vendor": "trenz", "name": "TE0818 \u2014 ZU9EG-2I, 4 GB DDR4", "verified_by": "vendor", "notes": "" } ], "_used_in_kits": [ { "mpn": "TE0813-02-3BE81-AS", "vendor": "trenz", "name": "TE0813 Starter Kit", "price": { "value": 1392.69, "currency": "USD" } }, { "mpn": "TE0817-02-7DE81-AS", "vendor": "trenz", "name": "TE0817 Starter Kit", "price": { "value": 2856.48, "currency": "USD" } }, { "mpn": "TE0818-02-9BE81-AS", "vendor": "trenz", "name": "TE0818 Starter Kit", "price": { "value": 2103.67, "currency": "USD" } }, { "mpn": "TE0818-02-9GI81-AS", "vendor": "trenz", "name": "TE0818 Starter Kit", "price": { "value": 2410.37, "currency": "USD" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "TEIB0006-03-A", "name": "TEIB0006-03-A Carrier", "status": "active", "url": "https://www.trenz-electronic.de/en/Baseboard-for-Trenz-Electronic-TEI0006-Altera-Cyclone-10-GX/TEIB0006-03-A", "vendor": "trenz", "price": { "value": 179.84, "currency": "USD" }, "clocking": { "programmable": true }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-C", "speed": "3.0", "role": "host" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "jtag", "uart" ] } ], "expansion": { "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.8, "vadj_max": 1.8 } ] }, "user_io": { "leds": 2, "pushbuttons": 2 }, "_class": "carrier", "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "VD100-Carrier", "name": "VD100 Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Versal-AI-Edge/VD100.html", "vendor": "alinx", "price": null, "eeprom": [ { "purpose": [ "user_data" ], "interface": "I2C", "size_kbits": 4, "part": "24LC04" } ], "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 4, "lanes": 4 } ], "video": { "mipi_csi": 2 }, "networking": { "sfp_plus": 2, "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "serial": { "can": 2 }, "usb": [ { "connector": "Type-A", "speed": "2.0", "role": "host" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ] } ], "expansion": { "pmod": 1 }, "storage": { "microsd": 1 }, "user_io": { "leds": 2, "pushbuttons": 2 }, "features": { "rtc": true }, "_class": "carrier", "_compatible_soms": [ { "mpn": "V100", "vendor": "alinx", "name": "V100", "verified_by": "vendor", "notes": "" } ], "_used_in_kits": [ { "mpn": "VD100", "vendor": "alinx", "name": "VD100", "price": { "value": 1640.99, "currency": "GBP" } } ] }, { "mpn": "Z11-P-Carrier", "name": "Z11-P Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/Z11-P.html", "vendor": "alinx", "price": null, "eeprom": [ { "purpose": [ "user_data" ], "interface": "I2C", "size_kbits": 4, "part": "24LC04" } ], "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 3, "lanes": 8 } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "displayport": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "usb": [ { "connector": "Type-C", "speed": "3.0", "role": "otg" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "gpio_header": 1, "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.2, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 1, "pushbuttons": 2 }, "_notes_html": "FMC VADJ supports 1.8 V or 1.2 V (discrete values; default 1.8 V). The Z11-P uses the same Alinx base board as the Z7-P (the vendor documents them jointly as the \"Z7-P/Z11-P development board\" with an identical base-board feature set): the FMC_VADJ rail comes from a dedicated ETA1471 buck regulator whose feedback divider is reconfigured by 2-pin jumper J8 \u2014 open = 1.8 V, fitted = 1.2 V. The FMC IPMI EEPROM is not consulted.
", "_notes_md": "FMC VADJ supports 1.8 V or 1.2 V (discrete values; default 1.8 V). The Z11-P uses the same Alinx base board as the Z7-P (the vendor documents them jointly as the \"Z7-P/Z11-P development board\" with an identical base-board feature set): the FMC_VADJ rail comes from a dedicated ETA1471 buck regulator whose feedback divider is reconfigured by 2-pin jumper J8 \u2014 open = 1.8 V, fitted = 1.2 V. The FMC IPMI EEPROM is not consulted.", "_class": "carrier", "_compatible_soms": [ { "mpn": "ACU11EG", "vendor": "alinx", "name": "ACU11EG", "verified_by": "vendor", "notes": "" } ], "_used_in_kits": [ { "mpn": "Z11-P", "vendor": "alinx", "name": "Z11-P", "price": { "value": 2186.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] }, { "mpn": "Z19-P-Carrier", "name": "Z19-P Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/Z19-P.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 3, "lanes": 16 } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "displayport": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 1 } ] }, "usb": [ { "connector": "Type-C", "speed": "3.0", "role": "otg" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "fmc": [ { "slot": "HPC0", "type": "hpc" }, { "slot": "HPC1", "type": "hpc" } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 2 }, "_class": "carrier", "_used_in_kits": [ { "mpn": "Z19-P", "vendor": "alinx", "name": "Z19-P", "price": { "value": 12000, "currency": "USD" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-2V5", "vendor": "opsero", "name": "Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP031-2V5", "vendor": "opsero", "name": "Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-2V5", "vendor": "opsero", "name": "Robust Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "HPC0", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP041-2V5", "vendor": "opsero", "name": "Robust Ethernet FMC 2.5V", "connector_type": "lpc", "target_slot": "HPC1", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC0", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC1", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" } ] }, { "mpn": "Z7-P-Carrier", "name": "Z7-P Base Board", "status": "active", "url": "https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/Z7-P.html", "vendor": "alinx", "price": null, "sensors": [ { "type": "temperature", "part": "LM75" } ], "pcie": [ { "type": "Edge", "gen": 3, "lanes": 8 } ], "m2": [ { "key": "M-key", "direction": "socket", "interfaces": [ "PCIe" ] } ], "video": { "displayport": 1 }, "networking": { "ethernet": [ { "speed": 1000, "ports": 2 } ] }, "usb": [ { "connector": "Type-C", "speed": "3.0", "role": "otg" } ], "usb_bridge": [ { "connector": "Micro-B", "functions": [ "uart" ], "ports": 2 } ], "expansion": { "gpio_header": 1, "fmc": [ { "slot": "HPC", "type": "hpc", "vadj_min": 1.2, "vadj_max": 1.8 } ] }, "storage": { "microsd": 1 }, "user_io": { "leds": 1, "pushbuttons": 2 }, "_notes_html": "FMC VADJ supports 1.8 V or 1.2 V (discrete values; default 1.8 V). The FMC_VADJ rail comes from a dedicated ETA1471 buck regulator whose feedback divider is reconfigured by 2-pin jumper J8: open = 1.8 V, fitted = 1.2 V. The user manual documents only the 1.8 V default; the FMC IPMI EEPROM is not consulted.
", "_notes_md": "FMC VADJ supports 1.8 V or 1.2 V (discrete values; default 1.8 V). The FMC_VADJ rail comes from a dedicated ETA1471 buck regulator whose feedback divider is reconfigured by 2-pin jumper J8: open = 1.8 V, fitted = 1.2 V. The user manual documents only the 1.8 V default; the FMC IPMI EEPROM is not consulted.", "_class": "carrier", "_used_in_kits": [ { "mpn": "Z7-P", "vendor": "alinx", "name": "Z7-P", "price": { "value": 1913.99, "currency": "GBP" } } ], "_compatible_fmc_cards": [ { "mpn": "OP120", "vendor": "opsero", "name": "2x QSFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP031-1V8", "vendor": "opsero", "name": "Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP080", "vendor": "opsero", "name": "Ethernet FMC Max", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FL9627", "vendor": "alinx", "name": "FL9627 4-Channel High-Speed AD Module", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": null, "notes": "" }, { "mpn": "OP063", "vendor": "opsero", "name": "FPGA Drive FMC Gen4", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP073", "vendor": "opsero", "name": "M.2 M-key Stack FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 2 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP103", "vendor": "opsero", "name": "MCIO PCIe FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP081", "vendor": "opsero", "name": "Quad SFP28 FMC", "connector_type": "hpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP068", "vendor": "opsero", "name": "RPi Camera FMC", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "Pin-compatible", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "OP041-1V8", "vendor": "opsero", "name": "Robust Ethernet FMC 1.8V", "connector_type": "lpc", "target_slot": "HPC", "verdict": "compatible", "summary": "All 4 groups", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" }, { "mpn": "FMC-SpaceWire-SpaceFibre-Mk3", "vendor": "star-dundee", "name": "FMC SpaceWire/SpaceFibre Board Mk3", "connector_type": "hpc", "target_slot": "HPC", "verdict": "partial", "summary": "2 of 6: SpaceFibre Port 1, SpaceFibre Port 2", "tier": "mechanical", "verified_by": null, "vadj_ok": true, "notes": "" } ] } ]