Z11-P Base Board

Z11-P Base Board is a carrier board from Alinx.

• MPN: Z11-P-Carrier
• Type: carrier board
• Vendor: Alinx
• Status: active
• Product page: https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/Z11-P.html
• Catalog page: https://boards.fpgadeveloper.com/carriers/Z11-P-Carrier
• Structured data (JSON): https://boards.fpgadeveloper.com/data/carriers.json

Specifications

• EEPROM:
• Interface: I2C; Size Kbits: 4; Part: 24LC04
• Purpose:
• user_data
• Sensors:
• Type: temperature; Part: LM75
• PCIe:
• Type: Edge; Gen: 3; Lanes: 8
• M.2:
• Key: M-key; Direction: socket
• Interfaces:
• PCIe
• Video:
• Displayport: 1
• Networking:
• Ethernet:
• Speed: 1000; Ports: 2
• USB:
• Connector: Type-C; Speed: 3.0; Role: otg
• USB Bridge:
• Connector: Micro-B; Ports: 2
• Functions:
• uart
• Expansion:
• GPIO Header: 1
• FMC:
• Slot: HPC; Type: hpc; Vadj Min: 1.2; Vadj Max: 1.8
• Storage:
• Microsd: 1
• User I/O:
• Leds: 1
• Pushbuttons: 2

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot HPC, mechanical
• Ethernet FMC 1.8V (OP031-1V8) — compatible, slot HPC, mechanical
• Ethernet FMC Max (OP080) — compatible, slot HPC, mechanical
• FL9627 4-Channel High-Speed AD Module (FL9627) — compatible, slot HPC, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot HPC, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot HPC, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot HPC, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot HPC, mechanical
• RPi Camera FMC (OP068) — compatible, slot HPC, mechanical
• Robust Ethernet FMC 1.8V (OP041-1V8) — compatible, slot HPC, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot HPC, mechanical

Compatible SoMs

• ACU11EG (ACU11EG)

Used in kits

• Z11-P (Z11-P)

Notes

FMC VADJ supports 1.8 V or 1.2 V (discrete values; default 1.8 V). The Z11-P uses the same Alinx base board as the Z7-P (the vendor documents them jointly as the "Z7-P/Z11-P development board" with an identical base-board feature set): the FMC_VADJ rail comes from a dedicated ETA1471 buck regulator whose feedback divider is reconfigured by 2-pin jumper J8 — open = 1.8 V, fitted = 1.2 V. The FMC IPMI EEPROM is not consulted.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*