Mercury+ PE3

Mercury+ PE3 is a carrier board from Enclustra.

• MPN: ME-PE3-C
• Type: carrier board
• Vendor: Enclustra
• Status: active
• Price: 1125 USD
• Product page: https://www.enclustra.com/en/products/base-boards/mercury-pe3/
• Catalog page: https://boards.fpgadeveloper.com/carriers/ME-PE3-C
• Structured data (JSON): https://boards.fpgadeveloper.com/data/carriers.json

Specifications

• PCIe:
• Type: Edge; Lanes: 8
• M.2:
• Key: M-key; Direction: socket
• Interfaces:
• PCIe
• SATA
• Clocking:
• Programmable: Yes
• Networking:
• QSFP Plus: 1
• Ethernet:
• Speed: 1000; Ports: 2; Endpoint: rj45
• High Speed I/O:
• Form: FireFly
• Video:
• HDMI Out: 1
• Displayport: 1
• USB:
• Connector: Type-A; Speed: 3.0; Role: host
• Connector: Type-C; Speed: 3.0; Role: otg
• USB Bridge:
• Connector: Micro-B
• Functions:
• jtag
• uart
• Storage:
• Microsd: 1
• Expansion:
• FMC:
• Slot: FMC1; Type: hpc; Vadj Min: 1.2; Vadj Max: 3.3

Notes

The available features depend on the equipped Mercury FPGA/SoC module. The base PE3 variant populates the QSFP+ cage and FMC HPC connector but omits the four SFP+ cages fitted on the PE3-4S variant.

FMC VADJ (VCC_FMC_ADJ) follows the VCC_IO_BC rail, selected by the I/O voltage selection jumpers on J2100: 1.2 V (VCC_1V2), 3.3 V (VCC_3V3), or the module-dependent VCC_OUT_A / VCC_OUT_B supplies (supported envelope 1.2-3.3 V). The factory default jumper positions apply no I/O voltage at all, so the VADJ rail is unpowered until the jumpers are set; the board does not read the FMC IPMI EEPROM.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*