K24 IO Carrier Card

K24 IO Carrier Card is a carrier board from Tria Technologies.

MPN: K24-IO-CC
Type: carrier board
Vendor: Tria Technologies
Status: eol
Product page: https://www.tria-technologies.com/products/k24-development-kit/
Catalog page: https://boards.fpgadeveloper.com/carriers/K24-IO-CC
Structured data (JSON): https://boards.fpgadeveloper.com/data/carriers.json

Specifications

EEPROM:
Interface: I2C; Size Kbits: 2; Part: AT24MAC402
Purpose:
mac_address
unique_id
Networking:
Ethernet:
Speed: 1000; Ports: 1
USB:
Connector: Type-A; Speed: 2.0; Role: host
USB Bridge:
Connector: Type-C
Functions:
jtag
uart
Expansion:
Pmod: 1
Click: 2
Storage:
Microsd: 1
User I/O:
Leds: 6
Rgb Leds: 2
Pushbuttons: 4
Dip Switches: 4

Compatibility

Used in kits

K24 Development Kit (AES-K24-IO-DK-G)

Notes

The carrier card carries the Kria K24 SOM on a 240-pin connector (CON1). It provides 10/100/1000 Ethernet (Microchip KSZ9131RNXI PHY), a USB 2.0 Type-A host port (USB3321C PHY), a shared USB Type-C JTAG/UART debug port, microSD, two HSIO TXR2 high-speed expansion sites, two MikroE Click sites, and a Type 1A Pmod site.

MPSoC boot mode is selected with the Boot Mode Switch SW1 (default M[3:0] = 0010, Master SPI flash):

Boot mode	M[3:0]	SW1 (1-2-3-4)
Master SPI flash	0010	ON-ON-OFF-ON
microSD card	0101	ON-OFF-ON-OFF
JTAG	0000	ON-ON-ON-ON

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*