Z19

Z19 is an FPGA development board from Alinx, built around the XCZU19EG-2FFVC1760I.

• MPN: Z19
• Type: FPGA development board
• Vendor: Alinx
• Device: XCZU19EG-2FFVC1760I
• Status: active
• Price: 12000 USD
• Product page: https://www.en.alinx.com/Product/SoC-Development-Boards/Zynq-UltraScale-plus-MPSoC/Z19.html
• Catalog page: https://boards.fpgadeveloper.com/boards/Z19
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: DDR4; Size Mb: 8192; Width Bits: 64
• Type: DDR4; Size Mb: 4096; Form Factor: sodimm
• Flash:
• Type: QSPI; Size Mb: 64
• Type: QSPI; Size Mb: 64
• Type: eMMC; Size Mb: 32768
• EEPROM:
• Interface: I2C; Size Kbits: 4; Part: 24LC04
• Purpose:
• user_data
• Sensors:
• Type: temperature; Part: LM75
• PCIe:
• Type: Slot; Gen: 3; Lanes: 8
• M.2:
• Key: M-key; Direction: socket; Lanes: 1
• Interfaces:
• PCIe
• High Speed I/O:
• Form: SMA; Count: 3; Lanes: 3
• Video:
• Displayport: 1
• Mipi Csi: 1
• Networking:
• Qsfp28: 4
• Ethernet:
• Speed: 1000; Ports: 2
• Serial:
• Can: 2
• Rs485: 2
• USB:
• Connector: Type-A; Speed: 3.0; Role: host; Ports: 2
• Connector: Type-A; Speed: 2.0; Role: host; Ports: 2
• USB Bridge:
• Connector: Micro-B; Ports: 2
• Functions:
• uart
• Expansion:
• FMC:
• Slot: HPC0; Type: hpc; Vadj Min: 1.2; Vadj Max: 1.8
• Slot: HPC1; Type: hpc; Vadj Min: 1.2; Vadj Max: 1.8
• Storage:
• Sata: 4
• Microsd: 1
• User I/O:
• Leds: 2
• Pushbuttons: 2
• Features:
• Rtc: Yes

Device Attributes

Resources

• LUTs: 522,720
• Flip-Flops: 1,045,440
• Block RAM (36Kb): 984
• UltraRAM: 128
• DSP Slices: 1,968
• MMCMs: 11
• HP I/O Pins: 424
• HD I/O Pins: 96
• Transceivers: 32 (GTH)
• Transceivers: 16 (GTY)

Vivado

• Tool Part: xczu19eg-ffvc1760-2-i
• ML Standard Support: No

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot HPC0, mechanical
• 2x QSFP28 FMC (OP120) — compatible, slot HPC1, mechanical
• Ethernet FMC Max (OP080) — compatible, slot HPC0, mechanical
• Ethernet FMC Max (OP080) — compatible, slot HPC1, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot HPC0, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot HPC1, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot HPC0, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot HPC1, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot HPC0, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot HPC1, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot HPC0, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot HPC1, mechanical
• RPi Camera FMC (OP068) — compatible, slot HPC0, mechanical
• RPi Camera FMC (OP068) — compatible, slot HPC1, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot HPC0, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot HPC1, mechanical

Notes

FMC bank I/O voltage is jumper-selectable between 1.8 V and 1.2 V (two discrete values only): shorting cap J5 sets the FMC1 banks (67/68), J88 sets the FMC2 banks (64/65/66). The user guide does not document a factory-default position; the FMC IPMI EEPROM is not consulted.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*