VMK180

VMK180 is an FPGA development board from AMD Xilinx, built around the XCVM1802-2MSEVSVA2197.

• MPN: VMK180
• Type: FPGA development board
• Vendor: AMD Xilinx
• Device: XCVM1802-2MSEVSVA2197
• Status: active
• Price: 9345 USD
• Product page: https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/vmk180.html
• Catalog page: https://boards.fpgadeveloper.com/boards/VMK180
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: DDR4; Size Mb: 8192; Form Factor: dimm
• Type: LPDDR4; Size Mb: 8192
• Clocking:
• Programmable: Yes
• PCIe:
• Type: Edge; Gen: 4; Lanes: 8
• Video:
• HDMI In: 1
• HDMI Out: 1
• Networking:
• Sfp28: 2
• Qsfp28: 1
• Ethernet:
• Speed: 1000; Ports: 3
• Serial:
• Can: 1
• USB Bridge:
• Connector: Type-C
• Functions:
• jtag
• uart
• Expansion:
• FMC:
• Slot: FMCP1; Type: fmcp; Vadj Min: 1.2; Vadj Max: 1.5
• Slot: FMCP2; Type: fmcp; Vadj Min: 1.2; Vadj Max: 1.5
• Storage:
• Microsd: 2
• User I/O:
• Leds: 4
• Pushbuttons: 6
• Dip Switches: 4
• Features:
• Power Monitoring: Yes
• Programmable Vadj: Yes

Device Attributes

Resources

• LUTs: 899,840
• Flip-Flops: 1,799,680
• Block RAM (36Kb): 967
• UltraRAM: 463
• DSP Slices: 1,968
• MMCMs: 12
• HD I/O Pins: 44
• XPIO Pins: 649
• Transceivers: 44 (GTY, 32.75 Gb/s max)

Vivado

• Tool Part: xcvm1802-vsva2197-2ms-e
• ML Standard Support: No

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot FMCP1, verified
• 2x QSFP28 FMC (OP120) — compatible, slot FMCP2, verified
• Ethernet FMC Max (OP080) — compatible, slot FMCP1, verified
• Ethernet FMC Max (OP080) — compatible, slot FMCP2, verified
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP1, verified
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP2, verified
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP1, verified
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP2, verified
• MCIO PCIe FMC (OP103) — compatible, slot FMCP1, verified
• MCIO PCIe FMC (OP103) — compatible, slot FMCP2, verified
• Quad SFP28 FMC (OP081) — compatible, slot FMCP1, verified
• Quad SFP28 FMC (OP081) — compatible, slot FMCP2, verified
• FL9627 4-Channel High-Speed AD Module (FL9627) — compatible, slot FMCP1, mechanical
• RPi Camera FMC (OP068) — compatible, slot FMCP1, mechanical
• RPi Camera FMC (OP068) — compatible, slot FMCP2, mechanical
• FL9627 4-Channel High-Speed AD Module (FL9627) — partial, slot FMCP2, mechanical

Notes

VADJ_FMC supports 1.2 V / 1.5 V (discrete values; default 1.5 V — note no 1.8 V option). A single VADJ_FMC rail feeds both FMC+ slots (FMCP1 J51 and FMCP2 J53), so both slots always run at the same voltage. The ZU4 System Controller sets it at boot after reading each attached FMC card's IPMI EEPROM, picking a voltage supported by both the board and the card(s); if no valid IPMI data is found the rail is set to 0 V. The SCUI (FMC > Set VADJ) can override the IPMI routine with an explicit value.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*