VEK280

VEK280 is an FPGA development board from AMD Xilinx, built around the XCVE2802-2MSEVSVH1760.

• MPN: VEK280
• Type: FPGA development board
• Vendor: AMD Xilinx
• Device: XCVE2802-2MSEVSVH1760
• Status: active
• Price: 6995 USD
• Product page: https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/vek280.html
• Catalog page: https://boards.fpgadeveloper.com/boards/VEK280
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: LPDDR4; Size Mb: 12288
• Clocking:
• Programmable: Yes
• PCIe:
• Type: Edge; Gen: 4; Lanes: 16
• Video:
• HDMI In: 1
• HDMI Out: 1
• Networking:
• Sfp28: 1
• Ethernet:
• Speed: 1000; Ports: 3
• Serial:
• Can: 2
• USB Bridge:
• Connector: Micro-B
• Functions:
• uart
• Expansion:
• Pmod: 1
• FMC:
• Slot: FMCP; Type: fmcp; Vadj Min: 1.5; Vadj Max: 1.5
• Storage:
• Microsd: 1
• User I/O:
• Leds: 4
• Pushbuttons: 2
• Dip Switches: 4
• Features:
• Power Monitoring: Yes

Device Attributes

Resources

• LUTs: 520,704
• Flip-Flops: 1,041,408
• Block RAM (36Kb): 600
• UltraRAM: 264
• DSP Slices: 1,312
• MMCMs: 9
• HD I/O Pins: 44
• XPIO Pins: 487
• Transceivers: 16 (GTYP, 32.75 Gb/s max)

Vivado

• Tool Part: xcve2802-vsvh1760-2ms-e
• ML Standard Support: No

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot FMCP, verified
• Ethernet FMC Max (OP080) — compatible, slot FMCP, verified
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP, verified
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP, verified
• MCIO PCIe FMC (OP103) — compatible, slot FMCP, verified
• Quad SFP28 FMC (OP081) — compatible, slot FMCP, verified
• FL9627 4-Channel High-Speed AD Module (FL9627) — compatible, slot FMCP, mechanical

Notes

VADJ_FMC is fixed at 1.5 V (regulator U282, IR38060) and cannot be changed — XPIO banks 705/706 are shared between the FMC+ connector (J51) and other board functions, so the rail is non-compliant with VITA 57.4. There is no IPMI-based VADJ negotiation: FMC cards requiring lower than 1.5 V are exposed to this higher voltage, so only use FMC cards that support 1.5 V.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*