VCU128

VCU128 is an FPGA development board from AMD Xilinx, built around the XCVU37P-L2FSVH2892E.

• MPN: VCU128
• Type: FPGA development board
• Vendor: AMD Xilinx
• Device: XCVU37P-L2FSVH2892E
• Status: discontinued
• Product page: https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/vcu128.html
• Catalog page: https://boards.fpgadeveloper.com/boards/VCU128
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: HBM2; Size Mb: 8192
• Type: DDR4; Size Mb: 4608; Width Bits: 80; Ecc: Yes
• Type: QDR-IV; Size Mb: 18; Width Bits: 36
• Type: RLD3; Size Mb: 288; Width Bits: 72
• Flash:
• Type: QSPI; Size Mb: 256
• Clocking:
• Programmable: Yes
• Sma Clock In: 2
• PCIe:
• Type: Edge; Gen: 4; Lanes: 8
• Networking:
• Qsfp28: 4
• Ethernet:
• Speed: 1000; Ports: 1
• USB Bridge:
• Connector: Micro-B
• Functions:
• jtag
• uart
• Expansion:
• FMC:
• Slot: FMCP; Type: fmcp; Vadj Min: 1.2; Vadj Max: 1.8
• User I/O:
• Leds: 8
• Pushbuttons: 1
• Features:
• Power Monitoring: Yes
• Programmable Vadj: Yes

Device Attributes

Resources

• LUTs: 1,303,680
• Flip-Flops: 2,607,360
• Block RAM (36Kb): 2,016
• UltraRAM: 960
• DSP Slices: 9,024
• MMCMs: 12
• HP I/O Pins: 636
• Transceivers: 96 (GTY, 28.21 Gb/s max)

Vivado

• Tool Part: xcvu37p-fsvh2892-l2-e
• ML Standard Support: No

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot FMCP, mechanical
• Ethernet FMC 1.8V (OP031-1V8) — compatible, slot FMCP, mechanical
• Ethernet FMC Max (OP080) — compatible, slot FMCP, mechanical
• FL9627 4-Channel High-Speed AD Module (FL9627) — compatible, slot FMCP, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMCP, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot FMCP, mechanical
• RPi Camera FMC (OP068) — compatible, slot FMCP, mechanical
• Robust Ethernet FMC 1.8V (OP041-1V8) — compatible, slot FMCP, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMCP, mechanical

Notes

VADJ supports 1.2 V / 1.5 V / 1.8 V (discrete values). Set at boot by the System Controller (Zynq-7000 XC7Z010, U42) after reading the FMC's IPMI EEPROM — the rail is set to 0 V if no FMC card is attached or its EEPROM holds no valid voltage. The System Controller user interface allows the IPMI routine to be overridden and an explicit VADJ value set.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*