VCK190

VCK190 is an FPGA development board from AMD Xilinx, built around the XCVC1902-2MSEVSVA2197.

• MPN: VCK190
• Type: FPGA development board
• Vendor: AMD Xilinx
• Device: XCVC1902-2MSEVSVA2197
• Status: active
• Price: 13195 USD
• Product page: https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/vck190.html
• Catalog page: https://boards.fpgadeveloper.com/boards/VCK190
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: DDR4; Size Mb: 8192; Form Factor: dimm
• Type: LPDDR4; Size Mb: 8192
• Clocking:
• Programmable: Yes
• PCIe:
• Type: Edge; Gen: 4; Lanes: 8
• Video:
• HDMI In: 1
• HDMI Out: 1
• Networking:
• Sfp28: 2
• Qsfp28: 1
• Ethernet:
• Speed: 1000; Ports: 3
• Serial:
• Can: 1
• USB Bridge:
• Connector: Type-C
• Functions:
• jtag
• uart
• Expansion:
• FMC:
• Slot: FMCP1; Type: fmcp; Vadj Min: 1.2; Vadj Max: 1.5
• Slot: FMCP2; Type: fmcp; Vadj Min: 1.2; Vadj Max: 1.5
• Storage:
• Microsd: 2
• User I/O:
• Leds: 4
• Pushbuttons: 6
• Dip Switches: 4
• Features:
• Power Monitoring: Yes
• Programmable Vadj: Yes

Device Attributes

Resources

• LUTs: 899,840
• Flip-Flops: 1,799,680
• Block RAM (36Kb): 967
• UltraRAM: 463
• DSP Slices: 1,968
• MMCMs: 12
• HD I/O Pins: 44
• XPIO Pins: 649
• Transceivers: 44 (GTY, 32.75 Gb/s max)

Vivado

• Tool Part: xcvc1902-vsva2197-2ms-e
• ML Standard Support: No

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot FMCP1, verified
• 2x QSFP28 FMC (OP120) — compatible, slot FMCP2, verified
• Ethernet FMC Max (OP080) — compatible, slot FMCP1, verified
• Ethernet FMC Max (OP080) — compatible, slot FMCP2, verified
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP1, verified
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP2, verified
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP1, verified
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP2, verified
• MCIO PCIe FMC (OP103) — compatible, slot FMCP1, verified
• MCIO PCIe FMC (OP103) — compatible, slot FMCP2, verified
• Quad SFP28 FMC (OP081) — compatible, slot FMCP1, verified
• Quad SFP28 FMC (OP081) — compatible, slot FMCP2, verified
• FL9627 4-Channel High-Speed AD Module (FL9627) — compatible, slot FMCP1, mechanical
• RPi Camera FMC (OP068) — compatible, slot FMCP1, mechanical
• RPi Camera FMC (OP068) — compatible, slot FMCP2, mechanical
• FL9627 4-Channel High-Speed AD Module (FL9627) — partial, slot FMCP2, mechanical

Notes

VADJ_FMC supports 1.2 V / 1.5 V (discrete values; default 1.5 V, shared by both FMC+ slots). Set at boot by the ZU4 System Controller per ANSI/VITA 57.4 IPMI: it reads each attached FMC card's IIC EEPROM and picks a voltage supported by both board and card (1.5 V with no card attached; 0 V if no valid IPMI data is found). The System Controller UI (FMC > Set VADJ) can override the IPMI routine with an explicit value.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*