TySOM-M-MPFS250
TySOM-M-MPFS250 is an FPGA development board from Aldec, built around the MPFS250T-FCG1152E.
- MPN: TySOM-M-MPFS250
- Type: FPGA development board
- Vendor: Aldec
- Device: MPFS250T-FCG1152E
- Status: active
- Product page: https://www.aldec.com/en/products/emulation/tysom_boards/polarfire_microchip/tysom_m_mpfs250
- Catalog page: https://boards.fpgadeveloper.com/boards/TySOM-M-MPFS250
- Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json
Specifications
- Memory:
- Type: DDR4; Size Mb: 2048; Width Bits: 32
- Type: DDR4; Size Mb: 2048; Width Bits: 36; Ecc: Yes
- Flash:
- Type: QSPI; Size Mb: 128
- EEPROM:
- Size Kbits: 64
- Purpose:
- user_data
- Storage:
- Microsd: 1
- Video:
- HDMI Out: 1
- Networking:
- QSFP Plus: 1
- Ethernet:
- Speed: 1000; Ports: 2
- Serial:
- Can: 1
- PCIe:
- Type: Slot; Gen: 2; Lanes: 4
- USB:
- Connector: Mini-B; Speed: 2.0; Role: host
- USB Bridge:
- Connector: Mini-B
- Functions:
- uart
- Expansion:
- Pmod: 1
- FMC:
- Slot: FMC1; Type: hpc; Vadj Min: 1.2; Vadj Max: 3.3
- Slot: FMC2; Type: hpc; Vadj Min: 1.2; Vadj Max: 3.3
- Sensors:
- Type: accelerometer
- Type: temperature
- User I/O:
- Leds: 4
- Dip Switches: 4
- Pushbuttons: 1
- Features:
- Power Monitoring: Yes
Notes
FMC VADJ/VIOA is set per slot with DIP switches [S3] (FMC1) and [S4] (FMC2):
| Voltage | SW1 | SW2 | SW3 | SW4 |
|---|
| 1.2V | OFF | OFF | OFF | OFF |
| 1.5V | ON | OFF | OFF | OFF |
| 1.8V | ON | ON | OFF | OFF |
| 2.5V | ON | ON | ON | OFF |
| 3.3V | ON | ON | ON | ON |
Aldec does not document a factory-default switch position. Selecting the wrong FMC voltage can damage the board or the mezzanine card. JTAG routing to each FMC slot can be disconnected via DIP switches [S1]/[S2].
--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*