Ti375 C529

Ti375 C529 is an FPGA development board from Efinix, built around the Ti375C529I3.

• MPN: Ti375C529-DK
• Type: FPGA development board
• Vendor: Efinix
• Device: Ti375C529I3
• Status: active
• Price: 995 USD
• Product page: https://www.efinixinc.com/products-devkits-titaniumti375c529.html
• Catalog page: https://boards.fpgadeveloper.com/boards/Ti375C529-DK
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: LPDDR4; Size Mb: 1024; Width Bits: 32
• Flash:
• Type: SPI; Size Mb: 64
• Type: SPI; Size Mb: 64
• Type: eMMC; Size Mb: 8192
• Clocking:
• Sma Clock In: 1
• Networking:
• Ethernet:
• Speed: 1000; Ports: 1
• USB Bridge:
• Connector: Type-C
• Functions:
• jtag
• uart
• Expansion:
• Pmod: 3
• FMC:
• Slot: LPC; Type: lpc; Vadj Min: 1.2; Vadj Max: 1.8
• Storage:
• Microsd: 1
• User I/O:
• Leds: 5
• Pushbuttons: 2
• Features:
• Rtc: Yes

Compatibility

Compatible FMC cards

• RPi Camera FMC (OP068) — compatible, slot LPC, mechanical

Notes

VADJ (rail 1V8_FMC) defaults to 1.8 V, set by the pin-strap resistor network of a TPS542A50 regulator; a 25 kΩ trimmer (VR1) in the strap network gives continuous hardware adjustment, with documented set points of 1.8 V and 1.2 V (the FMC-facing FPGA bank's VCCIO is on the same rail). Header PJ4 enables the regulator's I2C programming mode and J7 accepts an external bench supply for the rail — but there is no system controller and the board does not read the FMC card's IPMI EEPROM, so any VADJ change is manual.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*