Ti180 M484

Ti180 M484 is an FPGA development board from Efinix, built around the Ti180J484I3.

• MPN: Ti180-M484
• Type: FPGA development board
• Vendor: Efinix
• Device: Ti180J484I3
• Status: active
• Price: 850 USD
• Product page: https://www.efinixinc.com/products-devkits-titaniumti180m484.html
• Catalog page: https://boards.fpgadeveloper.com/boards/Ti180-M484
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: LPDDR4; Size Mb: 32; Width Bits: 16
• Flash:
• Type: SPI; Size Mb: 32
• Type: SPI; Size Mb: 32
• USB Bridge:
• Connector: Type-C
• Functions:
• jtag
• uart
• Expansion:
• FMC:
• Slot: LPC; Type: lpc; Vadj Min: 1.2; Vadj Max: 3.3
• Storage:
• Microsd: 1
• User I/O:
• Leds: 6
• Pushbuttons: 2

Compatibility

Compatible FMC cards

• RPi Camera FMC (OP068) — compatible, slot LPC, mechanical

Notes

The FMC VADJ pins are unpowered out of the box — resistors R140–R143 (0R, not assembled) must be fitted to connect the 3V3_FMC rail to the connector's VADJ pins. 3V3_FMC defaults to 3.3 V and is adjusted with trimmer potentiometer VR1 (or replaced by an external supply on header PT4) to match the daughter card (e.g. 1.2 / 1.5 / 1.8 V); the FMC bank VCCIO must be set to the same voltage via jumpers J10–J13. There is no auto-negotiation — the board does not read the FMC IPMI EEPROM.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*