DataStorm DAQ - M-Board FMC Carrier for M-Series Precision Converters

DataStorm DAQ - M-Board FMC Carrier for M-Series Precision Converters is an FPGA development board from Trenz Electronic, built around the 5CSEMA5F31C8N.

• MPN: TEI0022-03
• Type: FPGA development board
• Vendor: Trenz Electronic
• Device: 5CSEMA5F31C8N
• Status: active
• Price: 430.77 USD
• Product page: https://www.trenz-electronic.de/en/DataStorm-DAQ-M-Board-FMC-Carrier-for-M-Series-Precision-Converters/TEI0022-03
• Catalog page: https://boards.fpgadeveloper.com/boards/TEI0022-03
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: DDR3; Size Mb: 1024
• Type: DDR3; Size Mb: 1024
• Flash:
• Type: QSPI; Size Mb: 32
• Type: QSPI; Size Mb: 32
• Clocking:
• Programmable: Yes
• Networking:
• Ethernet:
• Speed: 1000; Ports: 1
• USB:
• Connector: Type-A; Speed: 2.0; Role: host; Ports: 4
• USB Bridge:
• Connector: Micro-B
• Functions:
• jtag
• uart
• Connector: Micro-B
• Functions:
• uart
• Expansion:
• Pmod: 4
• FMC:
• Slot: FMC; Type: lpc; Vadj Min: 1.2; Vadj Max: 3.3
• Sensors:
• Type: temperature
• Storage:
• SD: 1

Compatibility

Compatible FMC cards

• RPi Camera FMC (OP068) — compatible, slot FMC, mechanical

Notes

FMC VADJ is generated by an Enpirion EN5335QI whose VS pins select 1.2 V / 1.25 V / 1.5 V / 1.8 V / 2.5 V / 3.3 V (0.8 V also exists but is not usable with the Cyclone V). Selection is made before power-on with DIP switch S8 (S8-1..3), routed through the board-management MAX 10 firmware to the regulator's VID pins — the FMC IPMI EEPROM is not read. The TRM does not document a factory-default switch position.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*