Nexys-Video

Nexys-Video is an FPGA development board from Digilent, built around the XC7A200T-1SBG484C.

• MPN: Nexys-Video
• Type: FPGA development board
• Vendor: Digilent
• Device: XC7A200T-1SBG484C
• Status: active
• Price: 549 USD
• Product page: https://digilent.com/shop/nexys-video-artix-7-fpga-trainer-board-for-multimedia-applications/
• Catalog page: https://boards.fpgadeveloper.com/boards/Nexys-Video
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: DDR3; Size Mb: 512
• Flash:
• Type: QSPI; Size Mb: 32
• EEPROM:

-

• Purpose:
• user_data
• Audio:
• Codec: ADAU1761
• Line In: 1
• Line Out: 1
• Headphone Jack: 1
• Microphone: 1
• Video:
• HDMI In: 1
• HDMI Out: 1
• Displayport: 1
• Display:
• Oled: 128x32
• Networking:
• Ethernet:
• Speed: 1000; Ports: 1
• USB:
• Connector: Type-A; Speed: 2.0; Role: host
• USB Bridge:
• Connector: Micro-B
• Functions:
• jtag
• uart
• Expansion:
• Pmod: 4
• Xadc Header: 1
• FMC:
• Slot: LPC; Type: lpc; Vadj Min: 1.2; Vadj Max: 3.3
• Storage:
• Microsd: 1
• User I/O:
• Leds: 8
• Pushbuttons: 5
• Dip Switches: 8
• Features:
• Programmable Vadj: Yes

Device Attributes

Resources

• LUTs: 134,600
• Flip-Flops: 269,200
• Block RAM (36Kb): 365
• DSP Slices: 740
• MMCMs: 10
• HR I/O Pins: 285
• Transceivers: 4 (GTP, 3.75 Gb/s max)

Vivado

• Tool Part: xc7a200tsbg484-1
• ML Standard Support: Yes

Compatibility

Compatible FMC cards

• Ethernet FMC 1.8V (OP031-1V8) — compatible, slot LPC, mechanical
• Ethernet FMC 2.5V (OP031-2V5) — compatible, slot LPC, mechanical
• FL9627 4-Channel High-Speed AD Module (FL9627) — compatible, slot LPC, mechanical
• RPi Camera FMC (OP068) — compatible, slot LPC, mechanical
• Robust Ethernet FMC 1.8V (OP041-1V8) — compatible, slot LPC, mechanical
• Robust Ethernet FMC 2.5V (OP041-2V5) — compatible, slot LPC, mechanical

Notes

VADJ supports 1.2 V / 1.8 V / 2.5 V / 3.3 V (discrete values; default 1.2 V, set by on-board pull resistors that also enable the regulator at power-on). The FPGA design selects the voltage by driving the ADP2384 regulator's feedback multiplexer via the SET_VADJ(1:0) and VADJ_EN pins — the board does not read the FMC IPMI EEPROM automatically; voltages other than 1.2 V are the user design's responsibility. The same VADJ rail also powers the user pushbuttons, slide switches, XADC Pmod and FPGA banks 15/16.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*