PolarFire SoC Discovery Kit

PolarFire SoC Discovery Kit is an FPGA development board from Microchip, built around the MPFS095T-1FCSG325E.

MPN: MPFS-DISCO-KIT
Type: FPGA development board
Vendor: Microchip
Device: MPFS095T-1FCSG325E
Status: active
Price: 132 USD
Product page: https://www.microchip.com/en-us/development-tool/mpfs-disco-kit
Catalog page: https://boards.fpgadeveloper.com/boards/MPFS-DISCO-KIT
Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

Memory:
Type: DDR4; Size Mb: 1024; Width Bits: 16
Video:
Mipi Csi: 1
Networking:
Ethernet:
Speed: 1000; Ports: 1
USB Bridge:
Connector: Type-C
Functions:
jtag
uart
Expansion:
Raspberry Pi: 1
Click: 1
Storage:
Microsd: 1
User I/O:
Leds: 8
Pushbuttons: 2
Dip Switches: 8

Notes

The DDR4 device is a Micron MT40A512M16TB-062E (1 GB, x16) on MSS bank 6. Ethernet uses a Microchip VSC8221 10/100/1000BASE-T PHY connected over SGMII on MSS bank 5. The Raspberry Pi MIPI RX connector (J11) is on the underside of the board, as is the microSD socket.

Default jumper settings:

Jumper	Purpose	Default
J45	Bank 1 / Bank 5 I/O voltage (VDDI1_5): pins 1-2 = 3.3V (Raspberry Pi GPIO and mikroBUS), pins 2-3 = 2.5V (MIPI RX and Ethernet)	1 and 2 closed
J46	VDDAUX1 voltage: pins 1-2 = 3.3V, pins 2-3 = 2.5V	1 and 2 closed
J47	Power source: pins 1-2 closed = USB Type-C (J4), pins 1-2 open = 5V DC jack (J7)	1 and 2 closed
J49	7-segment display connector voltage: pins 1-2 = 3.3V, pins 2-3 = 5V	2 and 3 closed

If VDDI1_5 is set to 2.5V (J45 pins 2-3 closed), VDDAUX1 must also be set to 2.5V (J46 pins 2-3 closed).

Source: PolarFire SoC FPGA Discovery Kit User Guide (DS50003630E).

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*