Avant-X Versa

Avant-X Versa is an FPGA development board from Lattice, built around the LAV-AT-X70-3LFG1156C.

• MPN: LAV-X70-VERSA-EVN
• Type: FPGA development board
• Vendor: Lattice
• Device: LAV-AT-X70-3LFG1156C
• Status: active
• Price: 2000 USD
• Product page: https://www.latticesemi.com/products/developmentboardsandkits/avant-x-versa-board
• Catalog page: https://boards.fpgadeveloper.com/boards/LAV-X70-VERSA-EVN
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Flash:
• Type: OSPI; Size Mb: 64
• PCIe:
• Type: Edge; Gen: 3; Lanes: 4
• Networking:
• Sfp28: 2
• Qsfp28: 1
• Expansion:
• Pmod: 2
• FMC:
• Slot: FMC+; Type: fmcp; Vadj Min: 1.2; Vadj Max: 1.8

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot FMC+, mechanical
• Ethernet FMC Max (OP080) — compatible, slot FMC+, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMC+, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMC+, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMC+, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot FMC+, mechanical
• RPi Camera FMC (OP068) — compatible, slot FMC+, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMC+, mechanical

Notes

VADJ (VCC_VADJ) supports 1.2 V / 1.35 V / 1.5 V / 1.8 V (discrete values; default 1.8 V, 3.3 V not supported). Selected in hardware by the fitted feedback resistor R130 on the MPM3683-7 regulator (1 k = 1.8 V, 1.33 k = 1.5 V, 1.6 k = 1.35 V, 2 k = 1.2 V) — changing it requires rework. The board does not read the FMC IPMI EEPROM to set VADJ.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*