Avant-G Versa

Avant-G Versa is an FPGA development board from Lattice, built around the LAV-AT-G70-3LFG1156C.

• MPN: LAV-G70-VERSA-EVN
• Type: FPGA development board
• Vendor: Lattice
• Device: LAV-AT-G70-3LFG1156C
• Status: active
• Price: 2447 USD
• Product page: https://www.latticesemi.com/products/developmentboardsandkits/avant-g-versa-board
• Catalog page: https://boards.fpgadeveloper.com/boards/LAV-G70-VERSA-EVN
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• PCIe:
• Type: Edge; Gen: 3; Lanes: 4
• Networking:
• Sfp28: 2
• Qsfp28: 1
• Expansion:
• Pmod: 2
• Raspberry Pi: 1
• FMC:
• Slot: FMC+; Type: fmcp; Vadj Min: 1.2; Vadj Max: 1.8

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot FMC+, mechanical
• Ethernet FMC 1.8V (OP031-1V8) — compatible, slot FMC+, mechanical
• Ethernet FMC Max (OP080) — compatible, slot FMC+, mechanical
• FL9627 4-Channel High-Speed AD Module (FL9627) — compatible, slot FMC+, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMC+, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMC+, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMC+, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot FMC+, mechanical
• RPi Camera FMC (OP068) — compatible, slot FMC+, mechanical
• Robust Ethernet FMC 1.8V (OP041-1V8) — compatible, slot FMC+, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMC+, mechanical

Notes

VCC_VADJ for the FMC+ connector (J19) supports 1.2 V / 1.35 V / 1.5 V / 1.8 V (default 1.8 V). The voltage is set by changing feedback resistor R130 on the MPM3683-7 regulator (1 kΩ = 1.8 V, 1.33 kΩ = 1.5 V, 1.6 kΩ = 1.35 V, 2 kΩ = 1.2 V) — a soldered resistor, not a jumper, and the board does not read the FMC IPMI EEPROM.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*