Avant-E Evaluation

Avant-E Evaluation is an FPGA development board from Lattice, built around the LAV-AT-E70-2LFG1156C.

• MPN: LAV-E70-EVN
• Type: FPGA development board
• Vendor: Lattice
• Device: LAV-AT-E70-2LFG1156C
• Status: active
• Price: 300 USD
• Product page: https://www.latticesemi.com/products/developmentboardsandkits/avant-e-evaluation-board
• Catalog page: https://boards.fpgadeveloper.com/boards/LAV-E70-EVN
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: LPDDR4; Size Mb: 2048; Width Bits: 32
• Flash:
• Type: SPI; Size Mb: 64
• USB Bridge:
• Connector: Mini-B
• Functions:
• jtag
• Expansion:
• Pmod: 3
• Raspberry Pi: 1
• FMC:
• Slot: FMC1; Type: hpc; Vadj Min: 1.5; Vadj Max: 3.3
• Slot: FMC2; Type: hpc; Vadj Min: 1.5; Vadj Max: 3.3
• User I/O:
• Leds: 16
• Pushbuttons: 4
• Dip Switches: 8
• Seven Segment: 3

Notes

Each FMC slot has its own VADJ rail (VFMC1_ADJ / VFMC2_ADJ), jumper-selectable to 1.5 V (no jumper), 1.8 V (default), 2.5 V, or 3.3 V — FMC1 via JP7/JP8/JP43, FMC2 via JP44/JP45/JP46. Voltage is set before power-on; the board does not read the FMC IPMI EEPROM. FPGA banks 3/4/5 (FMC1) and 7/8/9 (FMC2) can optionally be powered from the corresponding VADJ rail via jumpers, and bank 5 is shared between the two slots — keep its signals at one voltage when both FMCs are used.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*