Arria 10 SX SoC Development Kit

Arria 10 SX SoC Development Kit is an FPGA development board from Altera, built around the 10AS066N3F40E2SG.

• MPN: DK-SOC-10AS066S-E
• Type: FPGA development board
• Vendor: Altera
• Device: 10AS066N3F40E2SG
• Status: active
• Price: 4495 USD
• Product page: https://www.altera.com/products/devkit/po-3006/arria-10-sx-soc-development-kit
• Catalog page: https://boards.fpgadeveloper.com/boards/DK-SOC-10AS066S-E
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: DDR4; Size Mb: 1024
• Type: DDR4; Size Mb: 2048
• Flash:
• Type: QSPI; Size Mb: 128
• Type: NAND; Size Mb: 128
• Clocking:
• Programmable: Yes
• PCIe:
• Type: Edge; Gen: 3; Lanes: 8
• Video:
• Displayport: 1
• Networking:
• SFP Plus: 2
• Ethernet:
• Speed: 1000; Ports: 3
• USB Bridge:
• Connector: Micro-B
• Functions:
• jtag
• Expansion:
• FMC:
• Slot: FMCA; Type: hpc; Vadj Min: 1.1; Vadj Max: 1.8
• Slot: FMCB; Type: lpc; Vadj Min: 1.1; Vadj Max: 1.8
• Storage:
• Microsd: 1

Compatibility

Compatible FMC cards

• Ethernet FMC Max (OP080) — compatible, slot FMCA, mechanical
• Ethernet FMC Max (OP080) — compatible, slot FMCB, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCA, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCB, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCA, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCB, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMCA, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMCB, mechanical
• 2x QSFP28 FMC (OP120) — partial, slot FMCA, mechanical
• 2x QSFP28 FMC (OP120) — partial, slot FMCB, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMCA, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMCB, mechanical
• Quad SFP28 FMC (OP081) — partial, slot FMCA, mechanical
• Quad SFP28 FMC (OP081) — partial, slot FMCB, mechanical

Notes

Each FMC slot's VADJ is jumper-selected before power-on (default 1.8 V on both slots). J42 sets FMCA VADJ to 1.1 / 1.2 / 1.35 / 1.5 / 1.8 V; J32 sets FMCB VADJ to 1.2 / 1.25 / 1.35 / 1.5 / 1.8 V (1.1 V with no jumper fitted). The board does not read the FMC IPMI EEPROM — VADJ is fixed by the jumper setting.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*