Stratix 10 GX Transceiver Signal Integrity H-TILE

Stratix 10 GX Transceiver Signal Integrity H-TILE is an FPGA development board from Altera, built around the 1SG280HU1F50E2VG.

• MPN: DK-SI-1SGX-H-A
• Type: FPGA development board
• Vendor: Altera
• Device: 1SG280HU1F50E2VG
• Status: active
• Price: 11000 USD
• Product page: https://www.altera.com/products/devkit/po-3028/stratix-10-gx-signal-integrity-development-kit-h-tile
• Catalog page: https://boards.fpgadeveloper.com/boards/DK-SI-1SGX-H-A
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Flash:
• Type: BPI; Size Mb: 128; Width Bits: 16
• Type: BPI; Size Mb: 128; Width Bits: 16
• Clocking:
• Programmable: Yes
• High Speed I/O:
• Form: MXP
• Networking:
• SFP Plus: 2
• Qsfp28: 2
• Cfp4: 1
• Ethernet:
• Speed: 1000; Ports: 1
• USB Bridge:
• Connector: Type-B
• Functions:
• jtag
• Expansion:
• FMC:
• Slot: FMCP0; Type: fmcp; Vadj Min: 1.2; Vadj Max: 1.8
• Slot: FMCP1; Type: fmcp; Vadj Min: 1.2; Vadj Max: 1.8
• User I/O:
• Leds: 8
• Pushbuttons: 8
• Dip Switches: 7
• Features:
• Power Monitoring: Yes

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot FMCP0, mechanical
• 2x QSFP28 FMC (OP120) — compatible, slot FMCP1, mechanical
• Ethernet FMC Max (OP080) — compatible, slot FMCP0, mechanical
• Ethernet FMC Max (OP080) — compatible, slot FMCP1, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP0, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP1, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP0, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP1, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMCP0, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMCP1, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot FMCP0, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot FMCP1, mechanical
• RPi Camera FMC (OP068) — compatible, slot FMCP0, mechanical
• RPi Camera FMC (OP068) — compatible, slot FMCP1, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMCP0, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMCP1, mechanical

Notes

Each FMC+ slot has its own VADJ rail (FMCA_VADJ / FMCB_VADJ), generated by a dedicated Enpirion EN63A0 regulator; the user guide (UG-20047) lists supported values of 1.2 V / 1.35 V / 1.5 V / 1.8 V per rail. The guide does not document how the voltage is selected or its boot default — there is no VADJ jumper in the factory switch settings, no Board Test System control, the VADJ rails are excluded from the LTM2987 / Power MAX 10 voltage-trim functions, and the FMC I2C buses route to the FPGA rather than a power controller — so there is no documented auto-negotiation from the FMC IPMI EEPROM. Verify the selection mechanism against the board schematic before relying on a specific VADJ value.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*