Cyclone 10 GX

Cyclone 10 GX is an FPGA development board from Altera, built around the 10CX220YF780E5G.

• MPN: DK-DEV-10CX220
• Type: FPGA development board
• Vendor: Altera
• Device: 10CX220YF780E5G
• Status: active
• Price: 1995 USD
• Product page: https://www.altera.com/products/devkit/po-3007/cyclone-10-gx-fpga-development-kit
• Catalog page: https://boards.fpgadeveloper.com/boards/DK-DEV-10CX220
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Clocking:
• Programmable: Yes
• PCIe:
• Type: Edge; Gen: 2; Lanes: 4
• Networking:
• SFP Plus: 2
• Ethernet:
• Speed: 1000; Ports: 1
• USB:
• Connector: Type-C; Speed: 3.1; Role: device
• Expansion:
• FMC:
• Slot: LPC; Type: lpc; Vadj Min: 1.8; Vadj Max: 1.8
• Features:
• Power Monitoring: Yes

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot LPC, mechanical
• Ethernet FMC Max (OP080) — compatible, slot LPC, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot LPC, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot LPC, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot LPC, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot LPC, mechanical

Notes

VADJ on the FMC LPC connector (J7) is fixed at 1.8 V, generated by a resistor-set buck regulator (Enpirion EN6347QI on power-solution-1 boards, MPM3650 on power-solution-2 boards). There is no jumper or software mechanism to change it, and the board does not read the FMC IPMI EEPROM — the user guide's "adjustable FMC power regulator" refers to the regulator hardware, not a user-settable rail.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*