Atum A5

Atum A5 is an FPGA development board from Terasic, built around the A5ED065BB32AE4SR0.

MPN: Atum-A5
Type: FPGA development board
Vendor: Terasic
Device: A5ED065BB32AE4SR0
Status: active
Price: 1999 USD
Product page: https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=2&No=1343
Catalog page: https://boards.fpgadeveloper.com/boards/Atum-A5
Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

Memory:
Type: DDR4; Size Mb: 4096; Width Bits: 32
Type: DDR4; Size Mb: 4096; Width Bits: 32
Flash:
Type: QSPI; Size Mb: 64
Type: eMMC; Size Mb: 8192
Sensors:
Type: temperature
PCIe:
Type: iPass; Gen: 3; Lanes: 4
Video:
HDMI Out: 1
Mipi Csi: 2
Networking:
QSFP Plus: 1
Ethernet:
Speed: 1000; Ports: 1
Speed: 2500; Ports: 1
USB Bridge:
Connector: Type-C
Functions:
jtag
Expansion:
GPIO Header: 2
FMC:
Slot: FMC+; Type: fmcp; Vadj Min: 1.2; Vadj Max: 1.2
Storage:
Microsd: 1
User I/O:
Leds: 5
Pushbuttons: 5
Dip Switches: 4
Features:
Power Monitoring: Yes

Compatibility

Compatible FMC cards

2x QSFP28 FMC (OP120) — compatible, slot FMC+, mechanical
Ethernet FMC Max (OP080) — compatible, slot FMC+, mechanical
FPGA Drive FMC Gen4 (OP063) — compatible, slot FMC+, mechanical
M.2 M-key Stack FMC (OP073) — compatible, slot FMC+, mechanical
MCIO PCIe FMC (OP103) — compatible, slot FMC+, mechanical
Quad SFP28 FMC (OP081) — compatible, slot FMC+, mechanical
RPi Camera FMC (OP068) — compatible, slot FMC+, mechanical

Notes

The FMC+ VADJ supply is fixed at 1.2 V (4 A max). Separately, jumper JP1 ("FMC+ HAB VCCIO Select Header") sets the VCCIO of the FPGA bank driving the HA/HB signal pins to 1.2 V (default) or 1.3 V — this changes the I/O standard of those signals only, not the documented VADJ power pin voltage. The board does not read the FMC IPMI EEPROM.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*