AXVU13F

AXVU13F is an FPGA development board from Alinx, built around the XCVU13P-2FHGB2104I.

• MPN: AXVU13F
• Type: FPGA development board
• Vendor: Alinx
• Device: XCVU13P-2FHGB2104I
• Status: active
• Price: 13658.99 GBP
• Product page: https://www.en.alinx.com/Product/FPGA-Development-Boards/Virtex-UltraScale-plus/AXVU13F.html
• Catalog page: https://boards.fpgadeveloper.com/boards/AXVU13F
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: DDR4; Size Mb: 32768; Width Bits: 72; Ecc: Yes; Form Factor: sodimm
• Flash:
• Type: QSPI; Size Mb: 128
• Type: QSPI; Size Mb: 128
• Clocking:
• Programmable: Yes
• Sma Clock In: 1
• Sma Clock Out: 1
• M.2:
• Key: M-key; Direction: socket; Gen: 4; Lanes: 2
• Interfaces:
• PCIe
• Key: E-key; Direction: socket
• Interfaces:
• PCIe
• USB
• Networking:
• Qsfp28: 1
• Ethernet:
• Speed: 1000; Ports: 1
• USB Bridge:
• Connector: Micro-B
• Functions:
• uart
• Expansion:
• GPIO Header: 1
• FMC:
• Slot: FMCP0; Type: fmcp; Vadj Min: 1.8; Vadj Max: 1.8
• Slot: FMCP1; Type: fmcp; Vadj Min: 1.8; Vadj Max: 1.8
• Slot: FMCP2; Type: fmcp; Vadj Min: 1.8; Vadj Max: 1.8
• Slot: FMCP3; Type: fmcp; Vadj Min: 1.8; Vadj Max: 1.8
• User I/O:
• Leds: 4

Device Attributes

Resources

• LUTs: 1,728,000
• Flip-Flops: 3,456,000
• Block RAM (36Kb): 2,688
• UltraRAM: 1,280
• DSP Slices: 12,288
• MMCMs: 16
• HP I/O Pins: 716
• Transceivers: 76 (GTY, 28.21 Gb/s max)

Vivado

• Tool Part: xcvu13p-fhgb2104-2-i
• ML Standard Support: No

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot FMCP0, mechanical
• 2x QSFP28 FMC (OP120) — compatible, slot FMCP1, mechanical
• 2x QSFP28 FMC (OP120) — compatible, slot FMCP2, mechanical
• 2x QSFP28 FMC (OP120) — compatible, slot FMCP3, mechanical
• Ethernet FMC Max (OP080) — compatible, slot FMCP0, mechanical
• Ethernet FMC Max (OP080) — compatible, slot FMCP1, mechanical
• Ethernet FMC Max (OP080) — compatible, slot FMCP2, mechanical
• Ethernet FMC Max (OP080) — compatible, slot FMCP3, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP0, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP1, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP2, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot FMCP3, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP0, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP1, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP2, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot FMCP3, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMCP0, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMCP1, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMCP2, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot FMCP3, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot FMCP0, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot FMCP1, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot FMCP2, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot FMCP3, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMCP0, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMCP1, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMCP2, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot FMCP3, mechanical

Notes

Each FMC+ slot has its own VADJ rail (FMC1_VADJ–FMC4_VADJ, 10 A each) generated by a dedicated IS66066 regulator; the user guide states the FMC bank I/O standard is 1.8 V on all four slots and documents no jumper or programming mechanism, so VADJ is effectively fixed at 1.8 V.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*