AXKU041

AXKU041 is an FPGA development board from Alinx, built around the XCKU040-2FFVA1156I.

• MPN: AXKU041
• Type: FPGA development board
• Vendor: Alinx
• Device: XCKU040-2FFVA1156I
• Status: active
• Price: 1053.99 GBP
• Product page: https://www.en.alinx.com/detail/275
• Catalog page: https://boards.fpgadeveloper.com/boards/AXKU041
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: DDR4; Size Mb: 4096; Width Bits: 64
• Flash:
• Type: QSPI; Size Mb: 32
• Type: QSPI; Size Mb: 32
• EEPROM:
• Interface: I2C; Size Kbits: 4; Part: 24LC04
• Purpose:
• user_data
• Sensors:
• Type: temperature; Part: LM75A
• PCIe:
• Type: Edge; Gen: 3; Lanes: 8
• Networking:
• SFP Plus: 2
• Ethernet:
• Speed: 1000; Ports: 1
• Serial:
• Can: 1
• USB Bridge:
• Connector: Micro-B
• Functions:
• uart
• Expansion:
• FMC:
• Slot: HPC; Type: hpc; Vadj Min: 1.8; Vadj Max: 1.8
• Slot: LPC0; Type: lpc; Vadj Min: 1.8; Vadj Max: 1.8
• Slot: LPC1; Type: lpc; Vadj Min: 1.8; Vadj Max: 1.8
• Storage:
• Microsd: 1
• User I/O:
• Leds: 4
• Pushbuttons: 1

Device Attributes

Resources

• LUTs: 242,400
• Flip-Flops: 484,800
• Block RAM (36Kb): 600
• DSP Slices: 1,920
• MMCMs: 10
• HR I/O Pins: 106
• HP I/O Pins: 424
• Transceivers: 20 (GTH, 16.375 Gb/s max)

Vivado

• Tool Part: xcku040-ffva1156-2-i
• ML Standard Support: No

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot HPC, mechanical
• Ethernet FMC Max (OP080) — compatible, slot HPC, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot HPC, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot HPC, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot HPC, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot HPC, mechanical
• 2x QSFP28 FMC (OP120) — partial, slot LPC1, mechanical
• Ethernet FMC Max (OP080) — partial, slot LPC1, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot HPC, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot LPC1, mechanical
• FPGA Drive FMC Gen4 (OP063) — partial, slot LPC1, mechanical
• M.2 M-key Stack FMC (OP073) — partial, slot LPC1, mechanical
• Quad SFP28 FMC (OP081) — partial, slot LPC1, mechanical

Notes

All three FMC slots run at a fixed 1.8 V IO level: the user manual states the LPC FMC1 (banks 47/48) and LPC FMC2 (banks 64/65) levels are "1.8V and cannot be modified", and the HPC (banks 66-68) voltage standard is 1.8 V. No jumper or programming mechanism exists.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*