AXKU040

AXKU040 is an FPGA development board from Alinx, built around the XCKU040-2FFVA1156I.

• MPN: AXKU040
• Type: FPGA development board
• Vendor: Alinx
• Device: XCKU040-2FFVA1156I
• Status: active
• Price: 1053.99 GBP
• Product page: https://www.en.alinx.com/Product/FPGA-Development-Boards/Kintex-UltraScale/AXKU040.html
• Catalog page: https://boards.fpgadeveloper.com/boards/AXKU040
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: DDR4; Size Mb: 4096; Width Bits: 64
• Flash:
• Type: QSPI; Size Mb: 32
• Type: QSPI; Size Mb: 32
• EEPROM:
• Interface: I2C; Size Kbits: 4; Part: 24LC04
• Purpose:
• user_data
• Sensors:
• Type: temperature; Part: LM75A
• Video:
• HDMI Out: 1
• Networking:
• SFP Plus: 4
• Ethernet:
• Speed: 1000; Ports: 2
• Serial:
• Can: 1
• USB Bridge:
• Connector: Micro-B
• Functions:
• uart
• Expansion:
• FMC:
• Slot: HPC; Type: hpc; Vadj Min: 1.8; Vadj Max: 1.8
• Slot: LPC0; Type: lpc; Vadj Min: 1.8; Vadj Max: 1.8
• Slot: LPC1; Type: lpc; Vadj Min: 1.2; Vadj Max: 3.3
• Features:
• Programmable Vadj: Yes
• Storage:
• Sata: 2
• Microsd: 1
• User I/O:
• Leds: 4
• Pushbuttons: 2

Device Attributes

Resources

• LUTs: 242,400
• Flip-Flops: 484,800
• Block RAM (36Kb): 600
• DSP Slices: 1,920
• MMCMs: 10
• HR I/O Pins: 106
• HP I/O Pins: 424
• Transceivers: 20 (GTH, 16.375 Gb/s max)

Vivado

• Tool Part: xcku040-ffva1156-2-i
• ML Standard Support: No

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot HPC, mechanical
• Ethernet FMC Max (OP080) — compatible, slot HPC, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot HPC, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot HPC, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot HPC, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot HPC, mechanical
• RPi Camera FMC (OP068) — compatible, slot LPC1, mechanical
• 2x QSFP28 FMC (OP120) — partial, slot LPC1, mechanical
• Ethernet FMC Max (OP080) — partial, slot LPC1, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot HPC, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot LPC1, mechanical
• FPGA Drive FMC Gen4 (OP063) — partial, slot LPC1, mechanical
• M.2 M-key Stack FMC (OP073) — partial, slot LPC1, mechanical
• Quad SFP28 FMC (OP081) — partial, slot LPC1, mechanical

Notes

FMC supply differs per slot: the HPC (banks 66-68) and LPC "FMC1" = LPC0 (banks 47/48) are fixed at 1.8 V ("cannot be modified"). Only LPC "FMC2" = LPC1 (HR banks 64/65, rail FMC2_VADJ) is adjustable — default 1.8 V, changed by software reprogramming the LP873220 PMIC; there is no System Controller and the board does not read the FMC IPMI EEPROM. Its 1.2-3.3 V range is inferred from the HR-bank VCCO options (1.2/1.35/1.5/1.8/2.5/3.3 V), not enumerated by the manual.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*