AX7450

AX7450 is an FPGA development board from Alinx, built around the XC7Z100-2FFG900I.

• MPN: AX7450
• Type: FPGA development board
• Vendor: Alinx
• Device: XC7Z100-2FFG900I
• Status: active
• Price: 1258.99 GBP
• Product page: https://www.en.alinx.com/Product/SoC-development-Boards/Zynq-7000-SoC/AX7450B.html
• Catalog page: https://boards.fpgadeveloper.com/boards/AX7450
• Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json

Specifications

• Memory:
• Type: DDR3; Size Mb: 1024; Width Bits: 32
• Type: DDR3; Size Mb: 2048; Width Bits: 64
• Flash:
• Type: QSPI; Size Mb: 64
• Type: eMMC; Size Mb: 8192
• PCIe:
• Type: Edge; Gen: 2; Lanes: 8
• Networking:
• Ethernet:
• Speed: 1000; Ports: 1
• USB:
• Connector: Micro-B; Speed: 2.0; Role: otg
• USB Bridge:
• Connector: Micro-B
• Functions:
• uart
• Expansion:
• FMC:
• Slot: HPC; Type: hpc; Vadj Min: 1.2; Vadj Max: 3.3
• Features:
• Programmable Vadj: Yes
• Storage:
• Microsd: 1
• User I/O:
• Leds: 4
• Pushbuttons: 1

Device Attributes

Resources

• LUTs: 277,400
• Flip-Flops: 554,800
• Block RAM (36Kb): 755
• DSP Slices: 2,020
• MMCMs: 8
• HR I/O Pins: 212
• HP I/O Pins: 150
• Transceivers: 16 (GTX, 6.6 Gb/s max)

Vivado

• Tool Part: xc7z100ffg900-2
• ML Standard Support: No

Compatibility

Compatible FMC cards

• 2x QSFP28 FMC (OP120) — compatible, slot HPC, mechanical
• Ethernet FMC Max (OP080) — compatible, slot HPC, mechanical
• FPGA Drive FMC Gen4 (OP063) — compatible, slot HPC, mechanical
• M.2 M-key Stack FMC (OP073) — compatible, slot HPC, mechanical
• MCIO PCIe FMC (OP103) — compatible, slot HPC, mechanical
• Quad SFP28 FMC (OP081) — compatible, slot HPC, mechanical
• RPi Camera FMC (OP068) — compatible, slot HPC, mechanical
• FMC SpaceWire/SpaceFibre Board Mk3 (FMC-SpaceWire-SpaceFibre-Mk3) — partial, slot HPC, mechanical

Notes

VADJ (Zynq banks 10-12 + FMC LA/HA) and VIO_B (bank 13 + FMC HB) are generated by two LP873220 PMICs, default 2.5 V (LVDS-capable). The user manual states both rails can be changed by software reprogramming the PMICs — there is no System Controller and the board does not read the FMC IPMI EEPROM; other voltages are the user's responsibility. The 1.2-3.3 V range is inferred from the HR-bank VCCO options (1.2/1.35/1.5/1.8/2.5/3.3 V), not enumerated by the manual.

--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*