UltraZed-EV Starter Kit
UltraZed-EV Starter Kit is an FPGA development kit from Tria Technologies, built around the XCZU7EV-1FBVB900I.
- MPN: UltraZed-EV-Starter-Kit
- Type: FPGA development kit
- Vendor: Tria Technologies
- Device: XCZU7EV-1FBVB900I
- Status: discontinued
- Price: 1595 USD
- Product page: https://www.xilinx.com/products/boards-and-kits/1-y3n9v1.html
- Catalog page: https://boards.fpgadeveloper.com/boards/UltraZed-EV-Starter-Kit
- Structured data (JSON): https://boards.fpgadeveloper.com/data/boards.json
Composition
Specifications
- Memory:
- Type: DDR4; Size Mb: 4096; Width Bits: 64
- Type: DDR4; Size Mb: 1024; Width Bits: 16
- Flash:
- Type: QSPI; Size Mb: 32
- Type: QSPI; Size Mb: 32
- Type: eMMC; Size Mb: 8192
- Type: QSPI; Size Mb: 32
- Type: QSPI; Size Mb: 32
- Type: eMMC; Size Mb: 8192
- PCIe:
- Type: Slot; Gen: 2; Lanes: 1
- Video:
- HDMI In: 1
- HDMI Out: 1
- Displayport: 1
- Sdi In: 1
- Sdi Out: 1
- Networking:
- Ethernet:
- Speed: 1000; Ports: 1
- SFP Plus: 2
- USB:
- Endpoint: phy; Speed: 2.0; Role: otg
- USB Bridge:
- Connector: Micro-B; Ports: 2
- Functions:
- uart
- Expansion:
- Pmod: 3
- FMC:
- Slot: HPC; Type: hpc
- Storage:
- Microsd: 1
- Sata: 1
Device Attributes
Resources
- LUTs: 230,400
- Flip-Flops: 460,800
- Block RAM (36Kb): 312
- UltraRAM: 96
- DSP Slices: 1,728
- MMCMs: 8
- HP I/O Pins: 159
- HD I/O Pins: 48
- Transceivers: 16 (GTH)
Vivado
- Tool Part: xczu7ev-fbvb900-1-i
- ML Standard Support: Yes
Notes
Configuration
Boot mode is determined by DIP switch labelled SW2.
| Boot mode | 1 | 2 | 3 | 4 |
|---|
| JTAG | 1 | 1 | 1 | 1 |
| Quad-SPI24 | 0 | 1 | 1 | 1 |
| Quad-SPI32 | 1 | 0 | 1 | 1 |
| SD1/MMC33 | 0 | 1 | 0 | 1 |
| SD1/MMC33 | 1 | 0 | 0 | 0 |
| EMMC18 | 1 | 0 | 0 | 1 |
Notes:
* 0 = OFF * 1 = ON * JTAG and SD card interfaces are only accessed on the carrier card
--- *Machine-readable catalog entry from https://boards.fpgadeveloper.com. Full dataset: https://boards.fpgadeveloper.com/llms.txt*